Vastex

The Vastex Dri-Vault 20 Screen Drying Cabinet is the ultimate solution for shops working with both standard and wide-format screens. With the capacity to hold up to 20 standard 25" x 36" screens or 10 oversized 51" x 36" screens, this cabinet combines efficiency with versatility. Equipped with a 290 CFM blower, industrial stainless steel finned heaters, and pressurized filtered airflow, the Dri-Vault 20 dries screens evenly while preventing dust and contaminants from entering the cabinet....

The Vastex Dri-Vault 24 Screen Drying Cabinet is built for high-production shops that need to dry large volumes of emulsion-coated screens quickly, consistently, and free from dust contamination. Using variable heat and powerful filtered airflow, the Dri-Vault can dry up to 24 screens in as little as 20 minutes, helping you maintain fast turnaround and professional-quality stencils. Designed with a pressurized chamber and dual latching doors, the Dri-Vault 24 prevents dust and contaminants...

The Vastex AirFlash HO Flash Cure Unit 18" x 18" combines infrared heat with adjustable forced air for a versatile screen printing flash curing system. A 140 CFM blower draws air through an oversized filtered intake, directs it through an air diverter, and distributes it evenly across the entire heater face. Both heat and airflow are adjustable. Digital percentage control provides repeatable adjustments from 0–100%. The AirFlash can operate with air only, full heat and air, or with modulated...

The Vastex AirFlash 18" x 24" Flash Cure Unit combines infrared heat and forced air in a versatile flash curing system for screen printing. A 140 CFM blower draws air through an oversized filtered intake, sends it through an air diverter, and distributes it evenly across the heater face. Both heat and airflow are adjustable. Digital percentage control allows for repeatable adjustments from 0–100%, while the unit can operate with air only, full heat and air, or with modulated air velocity and...

The Vastex LittleRed X1 30" Conveyor Dryer is a reliable, compact solution for entry-level to mid-sized screen printing shops. With a 30 in. (76 cm) wide conveyor belt and a 24 in. (61 cm) infrared heater, the X1-30 offers efficient curing for plastisol, water-based, discharge inks, and DTF adhesives. Available with either a 120V/2,000 watt heater (90 plastisol prints/hr) or a 240V/2,600 watt heater (up to 130 plastisol prints/hr), this dryer provides flexible power options to fit your shop’s...

The Vastex LittleRed X1-54 Conveyor Dryer is a powerful, mid-level infrared dryer built for growing screen printing shops that need higher throughput without jumping to industrial equipment. With a 54" wide belt and a 48" (122 cm) infrared heater, this dryer delivers fast, even curing for plastisol, water-based, discharge, and DTF adhesive prints. The X1-54 features Vastex’s signature high-density, medium-wave IR panels, engineered for maximum curing speed and edge-to-edge consistency. A...

The Vastex LittleRed X2 30" Conveyor Dryer is a mid-level dual-heater infrared conveyor dryer designed for entry-level to growing shops that need reliable, repeatable results at higher production rates. With a 30 in. (76 cm) wide belt and two 24 in. (61 cm) wide 240V/2,600 watt heaters (total 5,200 watts), the X2-30 can cure up to 260 plastisol-printed images per hour, along with water-based, discharge inks, and DTF adhesives. Engineered for efficiency and accuracy, the LittleRed X2 includes...

The Vastex LittleRed X2 54" Conveyor Dryer is the high-capacity model in the X2 series, designed for growing shops and mid-volume production runs. With a 54 in. (137 cm) wide conveyor belt and two 48 in. (122 cm) wide 240V/5,200 watt heaters (total 10,400 watts), the X2-54 can cure up to 520 plastisol-printed images per hour, or 180 water-based/discharge prints per hour, along with DTF adhesives. Built with efficiency and consistency in mind, the X2-54 uses closely spaced infrared coils to...

The Vastex LittleRed X3D 30" Conveyor Dryer is a versatile, high-performance solution for shops running DTG, plastisol, water-based, discharge inks, or DTF adhesives. Built for speed and consistency, this dryer uses three 24" infrared heaters (8,900W total at 240V) and a 30 in. (76 cm) wide belt to deliver professional curing results at higher rates than conventional designs. The X3D-30’s high-powered pre-heating zone rockets ink temperatures past 300°F within the first few inches of travel,...

The Vastex LittleRed X3D 54" Conveyor Dryer is a high-capacity multi-purpose infrared dryer designed for professional shops handling DTG, plastisol, water-based, discharge inks, and DTF adhesives. With a 54 in. (137 cm) conveyor belt and three 48 in. (122 cm) infrared heaters (17,800W total at 240V), the X3D-54 delivers fast, consistent curing at production-scale speeds. Its pre-heating zone quickly brings inks past 300°F within the first few inches of conveyor travel, maximizing dwell time...