Products 1-7 of 7
Albatross USA Inc.
Item #: 591020 -
AlbaChem VLR No. 1020 Vinyl Letter Removing SolventRemoves heat transfer vinyl and residual adhesives from most fabricsNew formula, does not contain Methylene ChlorideDoes not contain California Prop 65 ingredientsEasy to use and fast drying20 oz. BottleThe easy pour spout allows for easy application, minimizing waste. Highly effective and fast drying, VLR Vinyl Letter Removing Solvent No. 1020 will pay for itself by saving unnecessarily wasted garments.Shipping Information: Please note...
Item #: HTRM1620 -
Heat Transfer Sheets are a great way to protect printed images and garments when using a heat press for various applications (i.e. curing direct to garment ink, using foil, and applying opaque transfers, etc.) The Heat Transfer Sheet measures 16" x 20" and is very durable for multiple uses.
Item #: 26CWEED -
Soft rubber grip for comfortable weeding. Sharp, curved tip allows for easy and precise weeding and picking of even the most intricate designs.
Item #: 500 -
500LF Quick Trans Additive can be added to multipurpose plastisols to convert inks to a hot split or hot peel transfer ink. Add by volume, 1 part additive to 3 parts ink. Mix thoroughly. Excessive amounts of additive will reduce the opacity of the mixed ink.
Item #: TP2 -
Atlas Transfer Powder is a finely ground adhesive resin specifically manufactured to increase heat transfer opacity and adhesion. To apply, screen print mirror image onto transfer paper, generously sift Atlas Transfer Powder over entire image, hold paper by edge and allow excess powder to fall off. Size: 2.5lbs Container
Item #: 3801 -
3801LF Foil Adhesive is a clear adhesive used to produce brilliant metallic foil designs on textiles. The adhesive can be printed directly onto the fabric or directly on the foil as a conventional transfer. Designs made with 3801LF adhesive may be applied to light or dark fabrics.
Item #: 3802 -
3802LF Foil Resist Additive can be mixed with most standard plastisols to make the ink resist foil during application of the foil in a heat press. Add a maximum 10% to 15% by weight. For best foil application results, it is important to heat apply foil within 24 hours of printing and while the print is warm.