Atlas Pure White 2 Ink has been redesigned for todays printer.  It is a creamy low bleed white ink with good bleed resistance.  Designed for use on Cotton/Polyester Blends and 100% Cotton.   Low Bleed WhiteOptically BrightenedExcellent PrintabilityFor cotton/poly blends and 100% cottonCreamy consistency Fast flash w/ little tackFor auto or manual presses

Zen White™ Ink is a low bleed bright white with excellent printability. It has a creamy consistency combined with excellent bleed resistance. Rendering a perfect balance of printability and coverage. Ideal for both Manual and Automatic Presses.   High Opacity Low Bleed WhiteEnhanced Optical BrightnessExcellent PrintabilityFor cotton/poly blends and 100% cottonCreamy consistency Fast flash w/ little tackFor auto or manual presses ...

Hex Black Ink is designed for both 100% Cotton and Cotton/Polyester Blends.  It is a High Performance, Non-Phthalate (NP), ink formulated for printing on both manuals and automatics.  Note: This is not a Flex Cure Ink and has a standard cure temperature of 325ºF

Nordic White™ Ink is designed to cover 100% Polyester and Polyester - Cotton Blends.  This ink has a very creamy consistency combined with superior bleed resistance.  Designed for use on 100% Polyester and Polyester - Cotton Blends.   High Opacity Low Bleed WhiteSuperior PrintabilityFor 100% polyester and poly/cotton blendsSoft FeelCreamy consistency Fast flash w/ little tackFor auto or manual presses ...

Odin Poly Low Bleed White Ink is designed to cover 100% Polyester and Polyester - Cotton Blends.  This ink has a creamy consistency combined with superior bleed resistance.  For use on both Manual and Automatic Presses.  High Opacity Low Bleed WhiteExcellent PrintabilitySuperior Bleed Resistance.For 100% polyester and poly/cotton blendsCreamy consistency Fast flash w/ little tackFor auto or manual presses ...

Puff Additive can add a raised or puff effect when mixed with standard plastisol inks.  Add 10-15% by weight of the Puff Additive to standard plastisol ink.

Atlas Soft Hand Base is a clear base used to extend and soften most plastisol ink.  It will increase the flow of the ink and the hand. Use approximately 10%-20% to improve the hand.  The more added to the ink the more it effects the opacity.  Most inks are highly pigmented and can be reduced without it effecting the color. Please Note: The addition of Atlas Soft Hand Base reduces the bleed resistance of low bleed inks. ...

High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The New Atlas ink line is formulated using International Coatings 7500 series ink. It is creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up. Please Note: This...

Atlas Gold Glitter is a metallic ink with a large flake size the provides a sparkle to your garment.  Recommended to be printed through a wide mesh opening of 25- 30 TPI for best results.

Atlas Gold Glitter is a metallic ink with a large flake size the provides a sparkle to your garment.  Recommended to be printed through a wide mesh opening of 25- 30 TPI for best results.

Crystalina Shimmer is a translucent, iridescent glitter flake in a very clear base. It is a press-ready plastisol used for creating special sparkling effects on garments. 

Atlas Copper Shimmer provides a bright metallic effect.  Stir ink well prior to each use. For best visual results, this ink should be printed last in a design.

Atlas Anti-Bleeding Gray is a bleed blocking ink that can be used as an underbase for  polyester or other textile fabrics where dye migration is a severe problem. For use on 100% polyester, or polyester/cotton blends High-pigmented, very opaque ink Very creamyPhthalate-free

Atlas Curable Reducer will lower the viscosity of plastisol inks without affecting the fusing characteristics.  It is recommended to use 1% to 10% by weight.  In order to maintain opacity it is also recommended to use the minimal amount possible.Please Note: Atlas Curable Reducer should not be used in low bleed inks as it can lower the bleed resistance of those type inks. ...