Nylon Ink - 900 All-Pro Series (FlexCure)

Triangle Ink 1180-67 Transfer Adhesive Promoter is a professional adhesive powder formulated for use in Plastisol Screen Printing Inks to promote adhesion on difficult-to-print fabrics. Designed for both direct printing and transfer applications, this specialty additive improves adhesion on nylon jackets, bags, and tight knit polyester fabrics while maintaining the performance and print characteristics of your plastisol ink system. Compatible with Triangle Ink Tri-Flex Series Plastisol Inks...

When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F. These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the FlexCure™ Line and...

International Coatings 901 All-Pro™ White is a fast-flashing, two-part plastisol ink specifically formulated for printing on normally hard-to-print nylon. Part of the All-Pro™ 900 Series, it produces a harder, durable finish designed to resist scratching, scuffing, and peeling. When printing on nylon, 901 All-Pro White is used with All-Pro™ 900 Catalyst to promote proper adhesion. The recommended mixing ratio is 16 parts ink to 1 part catalyst by volume or 20 parts ink to 1 part catalyst by...

International Coatings 902 All-Pro™ Black is part of the 900 All-Pro™ Series, a fast-flashing, two-part plastisol ink system specifically formulated for printing on hard-to-print nylon. The series provides the durability and adhesion needed for specialty nylon screen printing while handling similarly to conventional plastisol inks. When printing on nylon, 902 All-Pro Black is used as part of the two-part All-Pro system with the 900 All-Pro™ Series Catalyst. The 900 Series can also be used on...