Haze & Stain Remover

Franmar D-HAZE Haze Remover is an effective screen reclaiming chemical designed to remove stubborn ghost images, haze, and ink stains from screen printing mesh. Unlike traditional caustic haze removers, D•HAZE will not damage the screen mesh, even when additional contact time is needed for difficult stains. Better haze removal helps extend screen life and reduces the cost of replacing screens prematurely. Made with American-grown soybeans, D-HAZE provides strong cleaning performance while...

Franmar D-Haze Haze Remover is designed to remove stubborn ghost images, haze, and ink stains from screen printing mesh during the reclaiming process. It helps restore used screens and keep mesh ready for continued use in the print shop. D-Haze is safe for all types of screen mesh and can remain on the mesh for additional contact time when difficult stains require it. This makes it useful for addressing persistent ghost images without damaging the screen mesh. Regular haze removal also helps...

Franmar D-Haze Haze Remover is designed to remove stubborn ghost images, haze, and ink stains that remain on screen printing mesh during the reclaiming process. It helps restore used screens so the mesh can continue to be prepared and reused for future printing jobs. D-Haze is safe for all types of screen mesh and is formulated so additional contact time can be used when difficult stains require it without damaging the mesh. Effective haze removal can also help promote longer screen life,...

Franmar D-Haze Gel Haze Remover is formulated for removing stubborn ghost images and haze from screen printing mesh. Its gel consistency clings directly to the affected area, providing greater control and extended contact time where difficult stains need additional attention. The clinging formula can remain on stubborn ghost and haze images for several hours or even overnight. D-Haze Gel is safe for all types of screen mesh and is designed to provide extended cleaning action without damaging...

D-Haze Haze Remover Gel clings to the affected haze area and can be left on for long periods of time for tough or stubborn ghost images. Safe on MeshClings to Haze AreaGelled for Greater ControlCan be Left on Overnight Overview Franmar’s D-Haze Haze Remover Gel is an exclusive gel formula that allows greater control for removing ghost and haze images. This gel formula clings to the affected haze area and can be left on for long periods of time for tough or stubborn ghost images. Good haze...

EconoPRO™ 500 Ink Degradent/Stain Remover quickly dissolves screen printing inks, adhesives and stains from mesh. Low Odor - For a better working environmentHigh Flash Point 196°FQuickly dissolves Inks and stainsExcellent freeze/thaw characteristics.Ideal for use in all climates.Never separates out active ingredients. Download the Technical Data Sheet ...

EconoPRO™ 500 Ink Degradent/Stain Remover quickly dissolves screen printing inks, adhesives and stains from mesh. Low Odor - For a better working environmentHigh Flash Point 196°FQuickly dissolves Inks and stainsExcellent freeze/thaw characteristics.Ideal for use in all climates.Never separates out active ingredients. Download the Technical Data Sheet ...

HR2800 Haze Remover (Quart) is a specially formulated thick liquid designed to remove embedded UV, conventional, and plastisol ink stains, including haze and ghost images that remain on screen printing mesh following emulsion removal. HR2800 works by lifting haze and embedded ink from the mesh, then emulsifying and dissolving ink constituents such as resins, binders, pigments, and plasticizers. The solution suspends these materials to help prevent them from reattaching to the mesh surface,...

ICC 858 Stain Remover/Degreaser (Quart) combines stain removal, degreasing, and mesh preparation in one screen cleaning product. Designed as a finishing step in the screen reclaiming process, ICC 858 removes residual stains and ghosting while leaving screen printing mesh degreased and ready for reuse. Its non-caustic formula is safer to handle and easier on mesh than highly caustic solutions. ICC 858 also helps renew hardened mesh through its degreasing action as it removes traces of stains....

Stain Removal and Degreasing – your finishing step takes out any residual stain or ghosting, leaving your screen degreased, like new and ready to use again. Stencils adhere readily to mesh cleaned with 858. Non-Caustic formula is safer to handleEasier on mesh than highly caustic solutionsRenews hardened mesh with degreasing action as it removes all traces of stains.

Stain Removal and Degreasing – your finishing step takes out any residual stain or ghosting, leaving your screen degreased, like new and ready to use again. Stencils adhere readily to mesh cleaned with 858. Non-Caustic formula is safer to handleEasier on mesh than highly caustic solutionsRenews hardened mesh with degreasing action as it removes all traces of stains.

ICC 938 Blue MAC Stain Remover/Degreaser (Quart) is a Mechanically Accelerated Cleaner designed to eliminate stains that other cleaners leave behind. Blue MAC attacks stains both chemically and mechanically, providing effective stain removal without damaging screen printing mesh. In addition to removing residual stains, Blue MAC degreases the mesh and leaves the screen ready for coating. This combination of stain removal and degreasing makes it a useful screen cleaning product for preparing...