Products 1-22 of 22
Show
Availability: Stock
Item #: VXVDC253624 -
Dry your screens securely in the 24 screen Dri-Vault. Variable heat and powerful filtered air flow can have your screens ready for exposure, in as little as 20 minutes.** **Drying times will vary. Humidity, thickness and type of emulsion used, and size of screens are factors in Dri-Vault curing time.
Availability: Out of Stock
Item #: VXVRSL15 -
Vastex VRS Lite Registration System combines the pinboard and pallet jig into one piece of equipment, with easy-to-read instructions printed directly on the surface.REGISTERS PRECISELY IN 4 QUICK STEPS The Vastex Registration System (VRS) is an ultra-fast and -accurate pin registration system that enables anyone to locate positives onto the screens off-press — then locate the screens onto any rear clamp press with all colors in register — in 4 easy steps: Attach your positives to setup sheets...
Availability: Out of Stock
Item #: VXVRSTU -
REGISTERS PRECISELY IN 4 QUICK STEPSThe Vastex Registration System (VRS) is an ultra-fast and -accurate pin registration system that enables anyone to locate positives onto the screens off-press — then locate the screens onto any rear clamp press with all colors in register — in 4 easy steps: Attach your positives to setup sheets in register, using the alignment grid/pinboardLocate and attach your positives in register to your screens using a Vastex pin board with screen stopsBurn all your...
Availability: Out of Stock
Item #: VXVRSTA -
REGISTERS PRECISELY IN 4 QUICK STEPSThe Vastex Registration System (VRS) is an ultra-fast and -accurate pin registration system that enables anyone to locate positives onto the screens off-press — then locate the screens onto any rear clamp press with all colors in register — in 4 easy steps: Attach your positives to setup sheets in register, using the alignment grid/pinboardLocate and attach your positives in register to your screens using a Vastex pin board with screen stopsBurn all your...
Availability: Out of Stock
Item #: VXS127 -
The S1-27 Mobile Stand comes standard with wheels, can ship UPS, and is easily assembled. The S1-27 Low Cost Stand is compatible with the following Vastex equipment: D-100 18" Conveyor Dryer D-1000 26" Conveyor Dryer E-100-LB Light Box E-100 Exposure Unit E-200 LED Exposure Unit ...
Availability: Out of Stock
Item #: V1PKZ4 -
Print four koozies at once with this attachment.
Availability: Out of Stock
Print on jacket hoods, aprons, bandanas, golf towels, mesh shorts, and many other small materials.FEATURESNever warp, high strength steel constructionQuick release and side ruler for easy locatingHeat & solvent resistant rubber top (replaceable)Neck guide to aid in garment positioning4-bolt adjustable, pallet arm (included w/ pallet)Elevated Pallets — no need to stretch shirts over the arm25 Year Non-warping Pallet Warranty ...
Availability: Out of Stock
Item #: V2PKZ4 -
Print four koozies at once with this attachment.
Availability: Out of Stock
Print on jacket hoods, aprons, bandanas, golf towels, mesh shorts, and many other small materials.FEATURESNever warp, high strength steel constructionQuick release and side ruler for easy locatingHeat & solvent resistant rubber top (replaceable)Neck guide to aid in garment positioning4-bolt adjustable, pallet arm (included w/ pallet)Elevated Pallets — no need to stretch shirts over the arm25 Year Non-warping Pallet Warranty ...
Availability: Out of Stock
Item #: VXVPZAS -
These repositionable attachments accommodate zippers and seams. Position them so a seam lays between them to print right across. Great for zip up hoodies and jackets with seams or panels. Comes in a set of 2 and works with both the V-1000 and V-2000.
Availability: Out of Stock
Item #: VXUC1000 -
High strength utility cart designed for holding screens doubles as a stand for shop equipment.Dimensions: 32" x 26" x 32"Holds 10 (ten) screensMax screen capacity: 23" x 31"Locking casters for easy mobilityAdjustable (configure the easily removable shelves to your liking)Convenient: easily mount certain exposure units, tabletop manual presses or heat presses. Call (800) 621-4173 for mounting kits and options.
Availability: Out of Stock
Item #: VXVDC513610 -
Dry your screens securely in the 20 screen Dri-Vault. Variable heat and powerful filtered air flow can have your screens ready for exposure, in as little as 20 minutes.** The Dri-Vault Cabinet (51" x 36") can also be used as a mount for the Exposit E4731 Exposure Unit.**Drying times will vary. Humidity, thickness and type of emulsion used, and size of screens are factors in Dri-Vault curing time.
Availability: Out of Stock
Item #: VXD100 -
The D-100 entry level tabletop conveyor dryer comes with a Hi/Lo heat adjustment and variable belt speed. This provides you with full control over your curing environment. This dryer is compact yet powerful due to the dense coil pattern and heater shields which eliminates hot and cold spots. This conveyor dryer is ideal for any home based or small business looking for an economical dryer with a small footprint.
Availability: Out of Stock
Item #: VXD1000 -
Vastex's entry level conveyor dryer comes with a Hi/Lo heat adjustment and variable belt speed. This provides you with full control over your curing environment. This dryer is compact yet powerful due to the dense coil pattern and heater shields which eliminates hot and cold spots. With a 26" x 46" long conveyor belt, the D-1000 Compact Infrared Conveyor is sized to accommodate wider jackets and sweats, and wider printed images, than a Vastex sub-compact D100 Dryer with 18" belt. This conveyor...
Availability: Out of Stock
Item #: VXLRX1 -
The LittleRed X1 Conveyor Dryer is a mid-level, compact, floor standing, dryer with 30" wide belt is the perfect companion for start-ups, home-based, and traveling printers. Easily cures up to 130 plastisol-printed pcs/hr-260 or 390 pcs/hr by adding two or three modular heating chambers and longer belt. Download the Brochure *Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc. ...
Availability: Out of Stock
Item #: VXX1D -
The X1D is the smallest conveyor dryer matched to the output of the most popular DTG printing systems. Its heating chamber has a boost zone to quickly reach the temperatures for inkjet, water-based and discharge inks. The dryer can cure up to 27 garments per hour for garments printed on a DTG with white underbase. Water-based and discharge inks can cure at a rate of 81 per hour and plastisol at 162 per hour. Using this conveyor dryer to cure DTG Inks improves the look of the...
Availability: Out of Stock
Item #: VXECII30 -
High production dryer for mid to large sized shops that need outputs of 300* or 600* pcs/hr/chamber. A compact powerhouse with many advanced features such as: digital temperature control, power exhaust and air recirculation. Redesigned and now with whisper quiet operation. The EconoRed II 30" conveyor dryer is available as a single or double chamber dryer. *Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc. ...
Availability: Out of Stock
Item #: VXLRX254 -
The LittleRed X2-54 is an economical dual heater dryer for shops that require a mid/high production output. Capable of 520* pcs/hr/chamber plastisol or 180 discharge/water-based printed garments Download the Brochure *Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc. ...
Availability: Out of Stock
Item #: VXECIII30 -
High production dryer for mid to large sized shops that need outputs of 475* or 950* pcs/hr/chamber. A compact powerhouse with many advanced features such as: digital temperature control, power exhaust and air recirculation. The EconoRed III 30" conveyor dryer is available as a single or double chamber dryer. *Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc. ...
Availability: Out of Stock
Item #: VXLRX3D30 -
The LittleRed X3D Series has a dual zone heat control, with a boost zone to quickly reach temperature required. This makes it a great conveyor dryer for direct-to-garment, plastisol, water-based, and discharge inks. 360+ Shirts/hr plastisol 130+ Shirts/hr water-based/discharge 51+ Shirts/hr DTG/digital white ink @ 3 min> Download the Brochure *Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc. ...
Availability: Out of Stock
Item #: VXLRX230 -
The LittleRed X2 is an economical dual heater dryer for entry-level shops that require medium production output. Capable of 260* pcs/hr/chamber and available in a 30" wide belt. Download the Brochure *Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc. ...