Screen Printing Products

The Lumitron units deliver fast, uniform and high resolution exposures using long lasting LED light strips. In addition to the fast exposure times and fine line detail, this unit will reduce your setup times, energy costs and overall cost of ownership. Unlike expensive metal-halide bulbs that require regular replacements, run at high temperatures and require startup and cool down time, the LED strips operate at much lower temperatures, can last over 50,000 hours and start and stop immediately...

InstaInk™ cleaning cartridge set (8 Cartrdiges) is designed for the Epson P400.  These cartridges are designed to unclog prints heads or for changing over from Epson OEM inks to InstaInk™.  It is recommended to do head cleanings through the Epson system before trying to use cleaning cartridges for clogged heads. Note: Do not leave cleaning fluid in machine for an extended period of time.  Fluid should be purged from system as soon as possible and no longer than a 24...

The Hotronix Auto Cap Heat Press is a heat press designed specifically with caps in mind. Features: Quick change platen, with up to 4 different optionsMagnetic assist on open and lock downDigital display of temperature, time and pressureTwin Timers™-Use two programmed times for two part transfers

The Vastex LittleRed X2 54" Conveyor Dryer is the high-capacity model in the X2 series, designed for growing shops and mid-volume production runs. With a 54 in. (137 cm) wide conveyor belt and two 48 in. (122 cm) wide 240V/5,200 watt heaters (total 10,400 watts), the X2-54 can cure up to 520 plastisol-printed images per hour, or 180 water-based/discharge prints per hour, along with DTF adhesives. Built with efficiency and consistency in mind, the X2-54 uses closely spaced infrared coils to...

Now you can print many types and sizes of hats with just one platen. The Hotronix® 360 IQ® Hat Press with patented Dual Silicone Platen™ technology is engineered to solve all your cap printing problems. Eliminates creasingEliminates scorchingPrint on all sides of the hatControl upper and lower heat independently for accurate applicationBonds adhesives from underneathIncludes 2 foam cover pads for applying thick or dimensional items Dual Silicone™ PlatenPatented dual silicone platen, with an...

1110 NP (Non-Phthalate) Curable reducer lowers the viscosity of plastisol inks without affecting the fusing characteristics.  When adding reducers to any plastisol ink, use a minimal amount of reducer to help maintain opacity. The recommended proportion of 1110 reducer to ink is 1% to 10% by weight. Please Note: 1110 reducer should not be used in low bleed inks as it can lower the bleed resistance of those type inks. ...

Triangle Ink 1180-51 Curable Reducer / Detackifier is a premium plastisol ink additive engineered to reduce ink viscosity and surface tack while maintaining proper curing characteristics. Developed primarily for use with Triangle white plastisol inks, it quickly improves ink flow with only small additions, making difficult-to-print white inks easier to manage during production. It is also compatible with Triangle Tri-Flex 1100 Series and Sta-True 1700 Series plastisol inks for additional...

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The Frame is 1-1/2" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons.Outside Dimension 23" x 31"Inside Dimension 20" x 28"Frame Width 1-1/2"Stretched to approximately 20 Newtons

The Vastex LittleRed X3D 30" Conveyor Dryer is a versatile, high-performance solution for shops running DTG, plastisol, water-based, discharge inks, or DTF adhesives. Built for speed and consistency, this dryer uses three 24" infrared heaters (8,900W total at 240V) and a 30 in. (76 cm) wide belt to deliver professional curing results at higher rates than conventional designs. The X3D-30’s high-powered pre-heating zone rockets ink temperatures past 300°F within the first few inches of travel,...

3804 PF (Phthalate Free) Low Cure Additive lowers the curing or fusion temperatures of most plastisol based inks to less than 300°F (149°C). Use the 3804 PF Low Cure Additive when printing onto temperature and color sensitive fabrics such as 100% polyester or non-woven polypropylene bags.  Recommended addition of 5% to 6% by weight. To obtain optimum performance, the additive must be thoroughly dispersed into the ink being modified. For use on 100% cotton, poly/cotton blends, and 100%...

The Vastex LittleRed X3D 54" Conveyor Dryer is a high-capacity multi-purpose infrared dryer designed for professional shops handling DTG, plastisol, water-based, discharge inks, and DTF adhesives. With a 54 in. (137 cm) conveyor belt and three 48 in. (122 cm) infrared heaters (17,800W total at 240V), the X3D-54 delivers fast, consistent curing at production-scale speeds. Its pre-heating zone quickly brings inks past 300°F within the first few inches of conveyor travel, maximizing dwell time...

Atlas Transfer Powder is a finely ground adhesive resin specifically manufactured to increase heat transfer opacity and adhesion. To apply, screen print mirror image onto transfer paper, generously sift Atlas Transfer Powder over entire image, hold paper by edge and allow excess powder to fall off.  Tech Sheet Size: 2.5lbs Container ...

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The frame is 1-3/8" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons.Outside Dimension 20" x 24"Inside Dimension 17" x 21"Frame Width 1-3/8"Stretched to approximately 20 Newtons

Unifix-LC is a low cure additive designed to lower the cure temperature of Virus inks to 248°F. Virus inks will maintain a regular shelf life after mixing in Unifix-LC low cure additive. Unifix-LC is compatible with Perfetto, Hydra, Geo Special Effect and WOW inks. Add no more than 3% by weight. Formaldehyde and phthalate free. For Safety Data Sheet requests, please fill out our form here. ...

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The Frame is 1-3/8" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons. Outside Dimension 20" x 28"Inside Dimension 17" x 25"Frame Width 1-3/8"Stretched to approximately 20 Newtons

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The Frame is 1-1/2" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons.Outside Dimension 23" x 31"Inside Dimension 20" x 28"Frame Width 1-1/2"Stretched to approximately 20 Newtons

3801LF Foil Adhesive is a clear adhesive designed to produce brilliant metallic foil designs on textiles. It provides screen printers with a way to incorporate metallic foil effects into garment designs on both light and dark fabrics. The adhesive can be printed directly onto the fabric for foil applications or printed directly onto the foil for use as a conventional transfer. This allows 3801LF Foil Adhesive to be used with different approaches to creating metallic foil designs on...

3802LF Foil Resist Additive is designed to be mixed with most standard plastisol inks to make the printed ink resist foil during heat press application. It provides screen printers with a way to control where foil adheres when incorporating foil into a printed design. 3802LF Foil Resist Additive can be added at a maximum of 10%–15% by weight to the plastisol ink. For best foil application results, the foil should be heat applied within 24 hours of printing and while the print is warm. For...

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The frame is 1-3/8" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons.Outside Dimension 20" x 24"Inside Dimension 17" x 21"Frame Width 1-3/8"Stretched to approximately 20 Newtons

3805LF Super Stretch Clear is a specially formulated non-phthalate plastisol ink that provides exceptional stretch properties. When used as a stretch additive, it increases the elongation properties of plastisol inks, making it a versatile option for applications where additional stretch is needed. As an additive, 10% to 25% of 3805LF Super Stretch Clear can be added to plastisol ink to improve its stretch and elongation characteristics. When printing regular plastisol inks on stretch fabrics...

New and Improved Formula! 7043 Guardian Gray is a bleed blocking non-phthalate plastisol underbase for use on 100% polyester or other textile fabrics where dye migration is a severe problem.  For use on 100% polyester, polyester/cotton blends, and sublimated dyed fabricsHigh-pigmented, very opaque ink Very creamy, short bodied ink, with low tack for ease of printing Cures between 275°F-325°F for 1 minuteNon-Phthalate ...

720 Softhand Clear Base is a super clear, curable extender base plastisol. This product is formulated to soften, extend and increase flow characteristics of most plastisol inks. How to Use 720 Softhand Clear 720 Softhand Clear Base can be added to the 700 Series, Multipurpose, 1100 Series, 7600 Series and 800 Series inks for improved hand, cost and printability. 720 is very clear and is highly recommended for extending any process color, especially the Pro-Brite™ Process Colors. For a...

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The Frame is 1-1/2" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons.Outside Dimension 23" x 31"Inside Dimension 20" x 28"Frame Width 1-1/2"Stretched to approximately 20 Newtons

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The frame is 1-3/8" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons.Outside Dimension 20" x 24"Inside Dimension 17" x 21"Frame Width 1-3/8"Stretched to approximately 20 Newtons