Screen Printing Products

Epson Chip Resetter for 4900 and 4910 This product is not an Epson product but will work on certain Epson Cartridges and third party cartridges like InstaINK that made for the above printer models.

The Chip Resetter (Small Format 7 & 9 Pin) is a simple tool for restoring recognition on compatible Epson cartridges, including InstaInk™ and other third-party refillable cartridges. If your printer fails to recognize a cartridge or incorrectly reports it as “empty,” this resetter reprograms the chip so the cartridge can function properly again. It is a practical accessory for screen printers and home users who rely on third-party ink systems for producing film positives. Compatible Printers...

Replacement Ink maintenance tank C12C890191 For Epson 4000/7600/9600/4800/4880/7800/9800

Replacement Ink Maintenance Tank for Epson T619300 FOR EPSON T3000, T3270, T5000, T5270, T7000, T7270

The Vastex AirFlash 18x24 Flash Cure Unit is engineered for printers working with both plastisol and water-based inks, as well as heat-sensitive fabrics. By combining infrared heating with an adjustable forced air system, this unit accelerates ink curing while keeping garments cool and protected. Featuring a powerful blower with filtered air intake, the AirFlash delivers clean, even airflow across the platen for consistent results. The system’s digital temperature controls allow fine...

Epson Chip Resetter Wide Format (4000, 4800, 4880)This product is not an Epson product but will work on certain Epson Cartridges and third party cartridges like InstaINK that made for the above printer models.

The Vastex LittleRed X1 30" Conveyor Dryer is a reliable, compact solution for entry-level to mid-sized screen printing shops. With a 30 in. (76 cm) wide conveyor belt and a 24 in. (61 cm) infrared heater, the X1-30 offers efficient curing for plastisol, water-based, discharge inks, and DTF adhesives. Available with either a 120V/2,000 watt heater (90 plastisol prints/hr) or a 240V/2,600 watt heater (up to 130 plastisol prints/hr), this dryer provides flexible power options to fit your shop’s...

The Vastex LittleRed X1-54 Conveyor Dryer is a powerful, mid-level infrared dryer built for growing screen printing shops that need higher throughput without jumping to industrial equipment. With a 54" wide belt and a 48" (122 cm) infrared heater, this dryer delivers fast, even curing for plastisol, water-based, discharge, and DTF adhesive prints. The X1-54 features Vastex’s signature high-density, medium-wave IR panels, engineered for maximum curing speed and edge-to-edge consistency. A...

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The Frame is 1-1/2" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons.Outside Dimension 23" x 31"Inside Dimension 20" x 28"Frame Width 1-1/2"Stretched to approximately 20 Newtons

The Digital Knight DK14S is Geo Knight's most portable, lowest cost Digital Swing-Away press. The 12x14 heat platen uses the same SuperCoil-Microwinding™ heater technology with LifeTime Warranty as all other Digital Knight Swing-Away presses.The DK14S utilizes the same heavy-duty solid steel industrial grade style clamping mechanism as the DK20S and DC16, along with the same accurate and easy to use digital electronics. It also boasts the same 2" product thickness range as the rest...

The Digital Knight DK20S is a 16" x 20" swing-away heat transfer press. The DK20S combines a heavy-duty solid steel industrial grade pressing framework with accurate and easy to use electronics to provide the operator with the best possible features and equipment needed for today's various heat transfer applications.

Stahls' Hotronix Fusion IQ™ Heat Press (16” x 20”) has everything the best-selling original Fusion heat press had to offer, but now includes new data-driven features to further increase efficiency, productivity, and proactive management in shops nationwide. The new Fusion IQ™ Heat Press offers a larger, higher resolution control panel featuring a user-friendly, highly responsive touchscreen with WiFi connection capability. The Fusion IQ™ will automatically send detailed reports to the Hotronix...

Hotronix® Air FUSION® IQ Heat Press (16" x 20" Heat Platen; Additional bottom platen sizes available at any time).  The Hotronix® Air FUSION® IQ Heat Press has added some new features to the product that improve upon the original while still keeping the same functionality of the original. An updated, more responsive and user friendly touchscreen has been added. The press now also has WiFi capabilities, allowing production managers to track the productivity and efficiency of each press and...

Hotronix® Air FUSION® IQ Heat Press (16" x 20" Heat Platen; Additional bottom platen sizes available at any time).  The Hotronix® Air FUSION® IQ Heat Press has added some new features to the product that improve upon the original while still keeping the same functionality of the original. An updated, more responsive and user friendly touchscreen has been added. The press now also has WiFi capabilities, allowing production managers to track the productivity and efficiency of each press and...

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The frame is 1-3/8" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons.Outside Dimension 20" x 24"Inside Dimension 17" x 21"Frame Width 1-3/8"Stretched to approximately 20 Newtons

The DK7 Cap press is a fully functional cap press for printing the front face of any sized headwear.The DK7 has a unique hold-down device that pulls the rear strap of the headwear down against the pressing surface, holding the cap in place. The DK7 accepts different sized interchangeable tables (standard size included - see additional accessories below) for accommodating youth & child sized caps, fitted and low profile caps, and many other items.

No more warping with Aluminum Frames. Aluminum Frames will hold their tension longer reducing the amount of screens purchased. Our Aluminum Frames are as inexpensive as Wood and sometimes even less than Wood Frames. The Frame is 1-3/8" wide. Frames have welded rounded corners and are stretched to approximately 20 Newtons. Outside Dimension 20" x 28"Inside Dimension 17" x 25"Frame Width 1-3/8"Stretched to approximately 20 Newtons

InstaInk™ cleaning cartridges are designed for the Epson P400.  These cartridges are designed to unclog prints heads or for changing over from Epson OEM inks to InstaInk™.  It is recommended to do head cleanings through the Epson system before trying to use cleaning cartridges for clogged heads. Note: Do not leave cleaning fluid in machine for an extended period of time.  Fluid should be purged from system as soon as possible and no longer than a 24 hour period. ...

The Vastex LittleRed X2 30" Conveyor Dryer is a mid-level dual-heater infrared conveyor dryer designed for entry-level to growing shops that need reliable, repeatable results at higher production rates. With a 30 in. (76 cm) wide belt and two 24 in. (61 cm) wide 240V/2,600 watt heaters (total 5,200 watts), the X2-30 can cure up to 260 plastisol-printed images per hour, along with water-based, discharge inks, and DTF adhesives. Engineered for efficiency and accuracy, the LittleRed X2 includes...

The Lumitron units deliver fast, uniform and high resolution exposures using long lasting LED light strips. In addition to the fast exposure times and fine line detail, this unit will reduce your setup times, energy costs and overall cost of ownership. Unlike expensive metal-halide bulbs that require regular replacements, run at high temperatures and require startup and cool down time, the LED strips operate at much lower temperatures, can last over 50,000 hours and start and stop immediately...

The Lumitron units deliver fast, uniform and high resolution exposures using long lasting LED light strips. In addition to the fast exposure times and fine line detail, this unit will reduce your setup times, energy costs and overall cost of ownership. Unlike expensive metal-halide bulbs that require regular replacements, run at high temperatures and require startup and cool down time, the LED strips operate at much lower temperatures, can last over 50,000 hours and start and stop immediately...

The Lumitron units deliver fast, uniform and high resolution exposures using long lasting LED light strips. In addition to the fast exposure times and fine line detail, this unit will reduce your setup times, energy costs and overall cost of ownership. Unlike expensive metal-halide bulbs that require regular replacements, run at high temperatures and require startup and cool down time, the LED strips operate at much lower temperatures, can last over 50,000 hours and start and stop immediately...

InstaInk™ cleaning cartridge set (8 Cartrdiges) is designed for the Epson P400.  These cartridges are designed to unclog prints heads or for changing over from Epson OEM inks to InstaInk™.  It is recommended to do head cleanings through the Epson system before trying to use cleaning cartridges for clogged heads. Note: Do not leave cleaning fluid in machine for an extended period of time.  Fluid should be purged from system as soon as possible and no longer than a 24...

The Hotronix Auto Cap Heat Press is a heat press designed specifically with caps in mind. Features: Quick change platen, with up to 4 different optionsMagnetic assist on open and lock downDigital display of temperature, time and pressureTwin Timers™-Use two programmed times for two part transfers