Ink - Screen Printing

Atlas Silver Glitter is a metallic plastisol screen printing ink with a large flake size that provides a sparkling silver effect on printed garments. The visible glitter particles create a distinctive metallic finish for designs that call for added sparkle. Because of its large flake size, Atlas Silver Glitter is recommended for printing through a wide mesh opening of 25–30 TPI for best results. This makes Silver Glitter a specialty ink option for adding a bold, sparkling silver appearance to...

Designed to produce: * Exceptionally vibrant colors * Super soft hand Available in: * 10 Colors of the Seritone Matching System– SMS has been developed to enable printers to quickly and economically match a wide variety of special shades. The colors have been selected for their cleanliness of tone, color strength, and suitability for intermixing. * Five Fluorescent Shades * Four-Color Process * Black * Tinting White * High Opacity (HO) White Primarily used as a direct print water-base and...

International Coatings 155 Crystalina Shimmer is a press-ready plastisol screen printing ink featuring translucent, iridescent glitter flakes suspended in a very clear base. The shimmer flakes create special sparkling effects on garments while allowing the underlying fabric or printed colors to remain visible through the clear base. 155 Crystalina Shimmer can be printed directly onto a garment or over other colors to highlight specific areas of a design. When used in a multicolor design,...

International Coatings 156 Silver Shimmer is a metallic plastisol screen printing ink designed to add a bright, non-tarnishing silver sparkle to printed garments. Its shimmering metallic appearance makes it a great choice for designs that need an eye-catching silver finish and added visual impact. 156 Silver Shimmer offers good opacity on dark fabrics and is bleed resistant, making it suitable for direct printing on 100% cotton and some cotton/polyester blends. The ink is supplied ready to...

Designed to produce: * Exceptionally vibrant colors * Super soft hand Available in: * 10 Colors of the Seritone Matching System– SMS has been developed to enable printers to quickly and economically match a wide variety of special shades. The colors have been selected for their cleanliness of tone, color strength, and suitability for intermixing. * Five Fluorescent Shades * Four-Color Process * Black * Tinting White * High Opacity (HO) White Primarily used as a direct print water-base and...

International Coatings 157 Gold Shimmer is a metallic plastisol screen printing ink formulated for direct printing on textiles. Its shimmering metallic effect adds a bright, non-tarnishing gold sparkle to garments, providing a specialty finish for designs that call for a distinctive gold appearance. 157 Gold Shimmer is recommended for 100% cotton and some cotton/polyester blends. The ink is bleed resistant, but is not classified as a non-bleed ink, so testing is recommended before production...

Designed to produce: * Exceptionally vibrant colors * Super soft hand Available in: * 10 Colors of the Seritone Matching System– SMS has been developed to enable printers to quickly and economically match a wide variety of special shades. The colors have been selected for their cleanliness of tone, color strength, and suitability for intermixing. * Five Fluorescent Shades * Four-Color Process * Black * Tinting White * High Opacity (HO) White Primarily used as a direct print water-base and...

International Coatings 158 Copper Shimmer is a metallic plastisol screen printing ink designed to produce a bright, non-tarnishing copper sparkle on printed garments. The ink features fine, shimmering glitter flakes in a low-bleed, low-fusion base, creating a distinctive metallic effect for specialty garment printing. The easy-to-print base makes 158 Copper Shimmer suitable for both manual and automatic screen printing. Its formulation helps reduce wear and tear on printers and equipment while...

92 Metallic Gold is a plastisol-based screen printing ink designed to produce a distinctive chrome-like metallic gold appearance on printed garments. For the best visual effect, the ink is recommended for direct printing onto the garment or fabric. 92 Metallic Gold comes ready for use and should be printed without modification. For best visual results, it should be printed last in the design to help maintain the appearance of the metallic finish. The ink is suitable for cotton and some...

International Coatings 96 Metallic Silver is a plastisol-based screen-printing ink designed to produce a distinctive chrome-like metallic silver appearance on printed garments. For the best visual results, 96 Metallic Silver should be printed directly onto the garment or fabric without an underbase. 96 Metallic Silver comes ready for use and should be printed without modification. Stir the ink well before each use, and print it last in the design for the best visual results. The ink is...

International Coatings Optilux® 507 Enhanced Reflective Plastisol Ink is a two-part, retro-reflective screen printing ink designed to create prints that react strongly to focused light. Reflective microspheres and metallic flakes give the ink a conventional metallic silver shimmer appearance under normal lighting, while headlights, flashlights, and other focused light sources are reflected back toward the source to help increase nighttime visibility. Optilux 507 is designed for use on 100%...

1811 Non-PVC, Non-Phthalate Granite Base™ is a versatile special effects ink designed to create a granite or vinyl-like substrate on printed garments. It can be used alone or in combination with other products to produce a wide variety of textured effects and surfaces, making it ideal for adding dimension and texture to screen printed designs. Granite Base can be printed on light or dark fabrics and used as either a flat print or a high-density print. Printing on textured surfaces or using...

Atlas Anti-Bleeding Gray is a bleed blocking ink that can be used as an underbase for polyester or other textile fabrics where dye migration is a severe problem. For use on 100% polyester, or polyester/cotton blends High-pigmented, very opaque ink Very creamyPhthalate-free

1110 NP (Non-Phthalate) Curable reducer lowers the viscosity of plastisol inks without affecting the fusing characteristics.  When adding reducers to any plastisol ink, use a minimal amount of reducer to help maintain opacity. The recommended proportion of 1110 reducer to ink is 1% to 10% by weight. Please Note: 1110 reducer should not be used in low bleed inks as it can lower the bleed resistance of those type inks. ...

Triangle Ink 1180-51 Curable Reducer / Detackifier is a premium plastisol ink additive engineered to reduce ink viscosity and surface tack while maintaining proper curing characteristics. Developed primarily for use with Triangle white plastisol inks, it quickly improves ink flow with only small additions, making difficult-to-print white inks easier to manage during production. It is also compatible with Triangle Tri-Flex 1100 Series and Sta-True 1700 Series plastisol inks for additional...

3804 PF (Phthalate Free) Low Cure Additive lowers the curing or fusion temperatures of most plastisol based inks to less than 300°F (149°C). Use the 3804 PF Low Cure Additive when printing onto temperature and color sensitive fabrics such as 100% polyester or non-woven polypropylene bags.  Recommended addition of 5% to 6% by weight. To obtain optimum performance, the additive must be thoroughly dispersed into the ink being modified. For use on 100% cotton, poly/cotton blends, and 100%...

Atlas Transfer Powder is a finely ground adhesive resin specifically manufactured to increase heat transfer opacity and adhesion. To apply, screen print mirror image onto transfer paper, generously sift Atlas Transfer Powder over entire image, hold paper by edge and allow excess powder to fall off.  Tech Sheet Size: 2.5lbs Container ...

Unifix-LC is a low cure additive designed to lower the cure temperature of Virus inks to 248°F. Virus inks will maintain a regular shelf life after mixing in Unifix-LC low cure additive. Unifix-LC is compatible with Perfetto, Hydra, Geo Special Effect and WOW inks. Add no more than 3% by weight. Formaldehyde and phthalate free. For Safety Data Sheet requests, please fill out our form here. ...

3801LF Foil Adhesive is a clear adhesive designed to produce brilliant metallic foil designs on textiles. It provides screen printers with a way to incorporate metallic foil effects into garment designs on both light and dark fabrics. The adhesive can be printed directly onto the fabric for foil applications or printed directly onto the foil for use as a conventional transfer. This allows 3801LF Foil Adhesive to be used with different approaches to creating metallic foil designs on...

3802LF Foil Resist Additive is designed to be mixed with most standard plastisol inks to make the printed ink resist foil during heat press application. It provides screen printers with a way to control where foil adheres when incorporating foil into a printed design. 3802LF Foil Resist Additive can be added at a maximum of 10%–15% by weight to the plastisol ink. For best foil application results, the foil should be heat applied within 24 hours of printing and while the print is warm. For...

3805LF Super Stretch Clear is a specially formulated non-phthalate plastisol ink that provides exceptional stretch properties. When used as a stretch additive, it increases the elongation properties of plastisol inks, making it a versatile option for applications where additional stretch is needed. As an additive, 10% to 25% of 3805LF Super Stretch Clear can be added to plastisol ink to improve its stretch and elongation characteristics. When printing regular plastisol inks on stretch fabrics...

New and Improved Formula! 7043 Guardian Gray is a bleed blocking non-phthalate plastisol underbase for use on 100% polyester or other textile fabrics where dye migration is a severe problem.  For use on 100% polyester, polyester/cotton blends, and sublimated dyed fabricsHigh-pigmented, very opaque ink Very creamy, short bodied ink, with low tack for ease of printing Cures between 275°F-325°F for 1 minuteNon-Phthalate ...

720 Softhand Clear Base is a super clear, curable extender base plastisol. This product is formulated to soften, extend and increase flow characteristics of most plastisol inks. How to Use 720 Softhand Clear 720 Softhand Clear Base can be added to the 700 Series, Multipurpose, 1100 Series, 7600 Series and 800 Series inks for improved hand, cost and printability. 720 is very clear and is highly recommended for extending any process color, especially the Pro-Brite™ Process Colors. For a...

International Coatings 220 Puff Additive is a plastisol additive formulated to create a raised, dimensional puff effect when mixed with compatible screen printing inks. It provides an easy way to turn standard plastisol colors into specialty-effect inks for apparel and textile printing. 220 Puff Additive can be hand stirred into International Coatings 900, 6100, 7500, and 7600 Series inks. The recommended maximum addition is 10% to 15% by weight. Proper measurement and thorough mixing help...