Screen Printing Products

3.4 mil calendered matte or gloss white vinyl filmPermanent clear adhesive72 lb polycoated kraft liner4 year outdoor durabilityConforms to flat surfacesFor Fleet or commercial vehicle graphics, outdoor/ indoor graphics and signsCut: vinyl cutters, flat-bed printers, steel rule or thermal diesThermal/solvent/eco-solvent/UV/screen/latex ink compatible

3.4 mil calendered matte white vinyl filmPermanent clear adhesive72 lb polycoated kraft liner4 year outdoor durabilityConforms to flat surfacesFor Fleet or commercial vehicle graphics, outdoor/ indoor graphics and signsCut: vinyl cutters, flat-bed printers, steel rule or thermal diesThermal/solvent/eco-solvent/UV/screen/latex ink compatible

Insta Jet Waterproof Film works with most dye and pigment inkjet inks. The film has a unique coating on one side allowing it to handle large ink loads for dark film positives.WaterproofClear translucentExceptional registrationFor use with most dye & pigment inksRapid drying timeSuperior halftone retentionResistant to humidityAvailable in pre-cut sheets or rollsThickness: 4 milFor high-quality film positives, print with Insta INKNote: Please store film at 60-75ºF and at humidity levels between...

Insta Jet Waterproof Film works with most dye and pigment inkjet inks. The film has a unique coating on one side allowing it to handle large ink loads for dark film positives.WaterproofClear translucentExceptional registrationFor use with most dye & pigment inksRapid drying timeSuperior halftone retentionResistant to humidityAvailable in pre-cut sheets or rollsThickness: 4 milFor high-quality film positives, print with Insta INKNote: Please store film at 60-75ºF and at humidity levels between...

The cutter protection strip is one of the most important parts on your printer/cutter. It allows for straight and true cuts without any jagged edges or ruined material. The Roland part 1000007739 is for use in the following VersaStudio models: BN-20 BN-20A BN-20D BN2-20 BN2-20A BY-20

The RBP-1500A Adhesive Activator is an Activator Spray that acts as the catalyst when sprayed onto the adhesive causing the adhesive to harden. Net Wt 10oz Shipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii.

Cleaning Kit 100ml, includes cleaning fluid & 10 swabs (ESL,UV)

Keep your Roland printer operating at its best with the Roland ASSY, CAP TOP SV CG2246 (6000007417), a genuine OEM replacement cap top designed for routine printer maintenance. The cap top creates a proper seal around the printhead during cleaning cycles, helping maintain ink flow, reduce nozzle clogging, and support consistent print quality. Compatible with the Roland VersaStudio BY-20, BY2-20, BD-8, BD12, BN2-20, and BN2-20A, BN2-30A, this genuine Roland replacement part is manufactured to...

Designed for the BD-8 UV Printer automated cleaning and manual cleaning. 10 Pack.

Designed for the BD-8 UV Printer automated cleaning and manual cleaning. 10 Pack.

The Roland Blade Holder XD-CH3 is a standard-performance replacement blade holder with an adjustable tip. The adjustable design allows the operator to control blade exposure for accurate vinyl and media cutting. Constructed with a black plastic housing, this genuine Roland component is a practical replacement for a worn or damaged blade holder. Verify that XD-CH3 is the correct holder for your Roland cutter before ordering. Features Genuine Roland replacement blade holderRoland item number:...

The Roland BN, BN2 & BY Series Replacement Pad Wipe is a genuine OEM replacement foam pad designed to support routine maintenance of compatible Roland printers. During the printer's cleaning cycle, the pad collects ink removed from the print head, helping maintain a clean maintenance station and supporting consistent print performance. Replacing the pad wipe at the recommended maintenance interval helps ensure proper printer operation and reduces ink buildup within the maintenance area. Using...

Replacement drain pad. This includes only the drain pad that goes inside the box. Fits: BN2-20 BN2-20A BY-20 BD-8

Roland S-PG2-CL Cleaning Fluid is a genuine OEM maintenance solution designed for use with the Roland S-PG2 Series Inks. Engineered specifically for compatible Roland DTF printing systems, it helps support routine printer maintenance and reliable printer operation. Compatible with the Roland VersaStudio BY-20 DTF Printer and Roland TY-300 DTF Printer, this cleaning fluid is formulated to work seamlessly with the S-PG2 ink system. Using genuine Roland consumables helps maintain printer...

The Roland Replacement Wiper Head is a routine maintenance component designed to help keep compatible Roland printers operating reliably. During the printer’s automatic cleaning cycle, the wiper removes excess ink, residue, and debris from the printhead area to support consistent ink flow and dependable print quality. A worn, damaged, or contaminated wiper may reduce cleaning effectiveness and allow ink buildup around the printhead. Replacing the wiper as part of regular printer maintenance...

This swab kit (IJ-SWABKIT5-50) is intended for use on all Roland DG inkjet devices.  Swabs are used to manually clean printheads, captops and wiper assemblies.   Each swab is 5 inches long.  There are 50 swabs included in this pack. 

Maintain reliable print performance with the Roland WIPER, HEAD FELT CG2246 (1000027150), a genuine Roland OEM replacement felt wiper designed for routine printer maintenance. The felt wiper removes excess ink and debris from the printhead during cleaning cycles, helping reduce ink buildup and support consistent print quality. Manufactured to Roland's original specifications, this replacement felt wiper is designed for a precise fit and dependable performance in the Roland VersaSTUDIO BN2-20,...

For cleaning and polishing glass, mirrors, windshields and windows. This easy-to use, fast acting product uses a clinging foam to break up soils and hold them - even on vertical surfaces. There is no dripping, no running and no streaking. With an exclusive formulation using denatured alcohol and no ammonia, this product cleans thoroughly, dries quickly, requires no rinsing and leaves a pleasant, fresh aroma. Clinging foam cleaner has special anti-static formulation.Removes smoke film, finger...

Once you remove the WOW or T.ONE transfer from the shirt you need to seal it with the T.Seal. The T.Seal has special coating that locks the toner to the fibers of the shirt. This helps prevent the transfer from coming off when you wash the shirt. We sell the T.Seal by the sheet.

Designed to produce: * Exceptionally vibrant colors * Super soft hand Available in: * 10 Colors of the Seritone Matching System– SMS has been developed to enable printers to quickly and economically match a wide variety of special shades. The colors have been selected for their cleanliness of tone, color strength, and suitability for intermixing. * Five Fluorescent Shades * Four-Color Process * Black * Tinting White * High Opacity (HO) White Primarily used as a direct print water-base and...

Print virtually any picture imaginable from your computer, and have it on your skin as a temporary tattoo in minutes - without the pain or regret of having an actual tattoo! Tattoos typically last3-5 days, but can be removed with soapy water and elbow grease! **For Laser Printers Only

All of Rhinotech's systems are designed for safe, convenient, easy access. Dimensions: 32"w x 48"h x 24"d Polypropylene Construction Chemical Resistant Back-lightOn/Off Light Switch Screen Holder Easy-clean Drain Plastic Legs Space for Recirculation System Width and Height specified are approx. outside dimension – Depth is inside dimension / allow 8” for the frame rack to determine the size you require.  ...

The Vastex PTF-100 Powder-To-Film System is a compact, enclosed DTF powder applicator designed to make adhesive powder application cleaner, safer, and more repeatable. Instead of coating wet DTF films in an open container, the PTF-100 applies powder inside a sealed cabinet to help reduce airborne dust, spills, and wasted powder. A filled cartridge releases adhesive powder over the printed film for uniform coverage. The adjustable timed vibration cycle then removes excess powder from the film...

DCT water slide decal continues to be the easiest and most effective method of decorating ceramics, candles, glass. The DCT works well on non flat items like a shot glass, candles or mug etc. The DCT can be cured at 350F for durability and dishwasher safe at low temperature settings. Both versions can also be cut in the plotter, ensuring consistent and accurate decal production.The box of DCT comes is clear or white backing. 50 sheets per box*For Laser Printers Only ...