Screen Printing Products

When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F. These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the FlexCure™ Line and...

Afford-a-Flash™ Flash Dryers are ideal for new screen print shops and start-ups, or as an auxiliary system in established shops. Highlighted by our exemplary Black Body® heater, this unit comes standard with a 10-foot cord, stand, and casters. The Afford-A-Flash™ Series does not have an indicator light or a on/off switch, but this low cost set-up will satisfy the basic requirements for start-ups or serve as a back up system for screen printing shops. *Free Shipping is limited to the contiguous...

Afford-a-Flash™ Flash Dryers are ideal for new screen print shops and start-ups, or as an auxiliary system in established shops. Highlighted by our exemplary Black Body® heater, this unit comes standard with a 10-foot cord, stand, and casters. The Afford-A-Flash™ Series does not have an indicator light or a on/off switch, but this low cost set-up will satisfy the basic requirements for start-ups or serve as a back up system for screen printing shops. *Free Shipping is limited to the contiguous...

The Airflash has a combined infrared and pass through heater.  Ideal for quickly flashing water-based and discharge inks.  The heating element  is 18" x 18" and a 5-star stand is included.  Every unit has built-in temperature control.  Add a Flash-Amatic for "hands-free" operation with an adjustable dwell timer (0 sec-10 min)

AlbaChem Water-Based Screen Opener is a fast-acting aerosol cleaner that quickly unclogs screen printing mesh blocked by dried water-based inks while the screen remains on press. The foaming formula helps restore ink flow, leaves no oily film or residue, and can also be used to remove ink and dirt from printing presses. Designed for use with photographic direct or indirect stencils and lacquer-proof knife-cut films, it's an ideal solution for maintaining clean screens and minimizing...

The AlbaChem® VENTA-TM Table Top Cleaning Station is a compact, powerful spot cleaning system designed for use with electric spot cleaning guns. Its strong vacuum motor draws cleaning fluid fumes away from the operator while drying the fabric quickly and completely, helping create a cleaner and safer spotting workspace. Fast drying also helps reduce or eliminate the “rings” or “circles” that can appear when spot cleaning certain fabrics. The vacuum action helps hold the fabric in place during...

Aluminum 18-Inch T-Square is perfect for setting up center lines on pallets.

The Aluminum Screen Rack is a practical storage solution for screen printing screens, helping keep your shop organized while reducing the chance of accidental damage. Built for easy movement around the shop, this rack works well at the washout booth, press, or exposure unit, making it easier to move screens where they are needed without stacking them or leaning them against walls or equipment. Designed to fit both 20" x 24" manual screens and 23" x 31" automatic screens, this versatile rack...

The Anatol Quick Light Pro UV LED Exposure Unit 23 x 31 is designed for screen printers who need fast exposure times, sharp stencil detail, and dependable consistency. Built for professional screen printing environments, this exposure unit exposes screens quickly, evenly, and efficiently while producing crisp detail, clean edges, and high-resolution half-tones across the full exposure area. As part of Anatol’s professional pre-press equipment lineup, the Quick Light Pro combines modern UV LED...

The Anatol Quick Light Pro UV LED Exposure Unit 26" x 36" is designed for screen printers who need fast exposure times, sharp stencil detail, and dependable consistency. Built for professional screen printing environments, this exposure unit exposes screens quickly, evenly, and efficiently while producing crisp detail, clean edges, and high-resolution half-tones across the full exposure area. As part of Anatol’s professional pre-press equipment lineup, the Quick Light Pro combines modern UV...

The Anatol Quick Light Pro UV LED Exposure Unit 36" x 48" is designed for screen printers who need fast exposure times, sharp stencil detail, and dependable consistency on larger screen sizes. Built for professional screen printing environments, this exposure unit exposes screens quickly, evenly, and efficiently while producing crisp detail, clean edges, and high-resolution half-tones across the full exposure area. As part of Anatol’s professional pre-press equipment lineup, the Quick Light...

The Anatol Solutions 24" x 11' Electric Dryer SED-2406-11700 is designed for print shops that want the narrow footprint of a 24" belt dryer with the added curing capacity of a longer 6' heat chamber. It is a strong fit for printers who need more dwell time for tougher curing applications while still keeping a manageable overall machine width. The SED-2406-11700 includes a 24" belt width, 6' heat chamber, 11' overall length, 18 ceramic heating elements, and 11,700 watts. Like the rest of the...

The Anatol Solutions 24" Electric Dryer SED-2404-7800 is a practical electric conveyor dryer for shops that need dependable curing with a compact 24" belt width and 4' heat chamber. Built for textile and t-shirt printing, this model combines ceramic heating technology, digital controls, and heavy-duty construction to deliver efficient curing when gas is not an option. The SED-2404-7800 features a 24" belt width, 4' heat chamber, 9' overall length, 12 ceramic heating elements, and 7,800 watts...

The Anatol Solutions 36" x 11' Electric Dryer SED-3606-15600 is built for shops that need a wider belt and stronger production capacity while keeping the efficiency and control of an electric conveyor dryer. With a 36" belt and 6' heat chamber, this model is well suited for curing a wider range of garments and print sizes. The SED-3606-15600 features a 36" belt width, 6' heat chamber, 11' overall length, 24 ceramic heating elements, and 15,600 watts. Standard features include a digital control...

The Anatol Solutions 36" x 19.5' Electric Dryer SED-3610-23400 is a larger-capacity electric conveyor dryer built for shops that need longer dwell time, wider belt space, and stronger production output. Its 36" belt width and 9'5" heat chamber make it a strong option for printers curing higher volumes or working with more demanding ink systems. This model features a 36" belt, 9'6" heat chamber, 19'5" overall length, 36 ceramic heating elements, and 23,400 watts. It also includes 5' infeed and...

The Anatol Solutions Mini Compact Electric Conveyor Dryer is built for screen printers who need powerful, efficient curing in a smaller footprint. Designed for shops tight on space but unwilling to compromise on quality, the Solutions Mini delivers industrial-grade performance in a compact design starting at a 24" belt width with a 2.5' heat chamber and 5' overall length. Models are available in four basic configurations ranging from 24" to 48" belt widths and 2.5' to 4' heat chambers, making...

The Anatol Thunder 4 Color 4 Station manual screen printing press delivers true production-level performance in a streamlined configuration. Built on the same industrial platform as larger Thunder models, this press features the All Heads Down capability, allowing any print head to be used on any pallet for maximum flexibility and efficiency. Designed for professional shops, the 4/4 offers the same precision micro-registration system, dual-bearing rotation, and heavy-duty construction found...

The Anatol Thunder 6 Color 6 Station manual screen printing press is engineered for serious production shops that demand precision, efficiency, and long-term durability. Built with Anatol’s industrial-grade design and the same pallet arm and carousel system found on their automatic presses, this machine bridges the gap between manual and automatic performance. With equal colors and stations, this configuration unlocks the powerful All Heads Down feature, allowing any print head to be used on...

Compact size. Big-press performance. The Anatol Titan S Automatic Screen Printing Press delivers exceptional print quality and efficiency while keeping air consumption low — making it one of the smartest upgrades for growing print shops. Built around Anatol’s innovative low-air-use design, the Titan S uses only two cylinders per print head, reducing maintenance, energy costs, and compressor requirements. The result? Faster production with fewer moving parts and less downtime. The Titan S...

The quick and easy way to clean your screens is with a pressure washer. The AR 610 pressure washer is both durable and cost effective. The AR 610 Pressure Washer is an excellent choice for small shops.Max PSI: 1,350 Max GPM: 1.9Horse Power: 1.7 Amps: 1519 Induction Motor: 120V 60HzIncludes:Trigger gunLance with adjustable spray nozzle25' high pressure hoseBuilt-in detergent injectorPressure gaugeCaution: Place the Pressure Washer away from spray-back. Ink, emulsion, and chemicals can damage...

The Atlas Double Sided Scoop Coater is designed to help screen printers apply emulsion smoothly and consistently to screens. Its dual sided coating edge gives you two coating options in one tool: a sharp edge for a thinner coat on higher mesh screens, and a rounded dull edge for coating lower mesh screens. That makes it a practical scoop coater for printers working with different mesh counts and stencil build requirements. Extruded from T6 aluminum, the Atlas Scoop Coater is easy to hold, sits...

The Auto Flash Dryer by BBC Industries, Inc. is a perfect flash dryer for your automatic press. Each model includes one Black Flash® dryer and may be inserted at any print head using its adjustable bracket that fits many automatic presses today. The bracket fits easily onto the floodbar and will shuttle out over the platen as the floodbar moves. The bracket also allows the dryer to be angled so that the dryer face is level with the platen. This lightweight Auto Flash Dryer model is easily...

The Auto Flash Dryer by BBC Industries, Inc. is a perfect flash dryer for your automatic press. Each model includes one Black Flash® dryer and may be inserted at any print head using its adjustable bracket that fits many automatic presses today. The bracket fits easily onto the floodbar and will shuttle out over the platen as the floodbar moves. The bracket also allows the dryer to be angled so that the dryer face is level with the platen. This lightweight Auto Flash Dryer model is easily...

The A.W.T. Pro-Angle Scoop Coater is designed to coat screens evenly and uniformly while making emulsion application easier and more consistent. Its one-sided Pro-Angle design is calibrated to provide a smooth, controlled coating deposit, helping screen printers achieve repeatable stencil builds with comfortable handling during the coating process. Made from hard anodized gold aluminum, the Pro-Angle Scoop Coater is built for durability, easy cleanup, and leak-resistant performance. The...