Customer Reviews
Products 1-24 of 115
Show
International Coatings Color Card international coatings, ink, color card, chart
Price: FREE
Availability: Out of Stock
Item #: CCIC -

    Includes colors for the following International Coatings ink series:700 Series Direct Print Plastisol900 Series Nylon Plastisol7100 Performance Pro™ PlastisolUltraMix® 7500 Series Direct Print Plastisol / 7500 Series Color Concentrates / Pigment Dispersions7600 Series Direct Print PlastisolSpecialty Plastisols, Glitters & Metallic ColorsApplication Chart for all of the above series is included on the back of the color card. Limit one per customer. No charge shipping when ordered with other...

    7014 LEGACY WHITE INK
    Price: $29.57
    Availability: Stock
    Item #: IC7014 -

      Re-designed from the ground up to give customers the best white ink possible. International Coatings believes that their R&D department exceeded expectations, making the 7014 Legacy White one of the best white inks in the market today. In fact, when tested, 7014 Legacy White outperformed competitors' inks. Press ready and is very opaque with the subsequent print producing a matte finishHas good bleed blocking characteristicsCan be used on 100% cotton and 50/50 poly/cotton blendsIs very creamy,...

      7022 Cool Whtie
      Price: $29.57
      Availability: Stock
      Item #: IC7022 -

        7022 Cool White™ is a low bleed white that is part of the FlexCure™ line of inks.  It can cure from 275° to 325°F.    This will allow it to work as both a low cure and standard plastsiol ink.  You can match your cure temperature to the substrate and not have to worry about the cure temperature Press ready and is very opaque with the subsequent print producing a matte finishHas good bleed blocking characteristicsCan be used on 100% cotton, poly/cotton blends, 100%...

        Blaze Low Bleed White
        Reg: $24.30
        Sale: $21.87
        Availability: Stock
        Item #: IC7042 -

          7042 Blaze Low Bleed White is an easy to print opaque white ink. For use with both manual and automatic printing, this white ink requires less effort to print allowing automatic printers to use lower pressure settings thereby increasing screen life. Manual printers will notice the difference because it will be easier to print which will reduce fatigue. Low Bleed - Superior brightness and opacity Fast Flashing - and soft hand Can be used on 100% cotton and 50/50 poly/cotton blends Easy to print...

          7007 KNOCK OUT WHITE INK
          Price: $21.46
          Availability: Stock
          Item #: IC7007 -

            7007 Knock Out Low Bleed White by International Coatings is a low bleed, high pigment, fast flashing, low tack, non-phthalate plastisol screen printing ink. 7007 Knock Out Low Bleed White has a creamy viscosity and medium body, making the ink suitable for both auto and manual presses. This ink offers superior performance through fast production speeds, and its brightness and opacity.

            7113 PERFORMANCE PRO WHITE
            Price: $42.12
            Availability: Stock
            Item #: IC7113 -

              The 7100 Performance Pro™ Series consists of low bleed, non-phthalate, low cure* inks that can be printed on performance fabrics and other sports-related garments.

              711 CLASSIC WHITE
              Price: $33.21
              Availability: Stock
              Item #: IC711 -

                711LF* LB (low-bleed) HP (high pigment) is fast flashing, low fusing, low tack white plastisol ink. 711LF has a creamy viscosity and is easy to print. It requires less pressure than most other whites to print through the screen. It is a truly white white and emits no objectionable odor. The ink contains no bleaching agents and its performance is recognized as superior to other low bleed inks.711 is Phthalate Free*Lead Free- contains less than 0.025% lea ...

                7116 Performance Pro Black
                Price: $30.38
                Availability: Stock
                Item #: IC7116 -

                  The 7100 Performance Pro™ Series consists of low bleed, non-phthalate, low cure* inks that can be printed on performance fabrics and other sports-related garments. Recommendations: Fabric: 100% Polyester, Poly-blends, and Performance Fabrics Cure Temperature: 275°F-300°F Ink Application: 7100 Series should be used straight from the container without any modifications Additives: Not Recommended Screen Mesh: 110-230t/in monofilament Emulsion: Any direct or indirect emulsion or capillary...

                  7127 Performance Pro Gold
                  Price: $42.12
                  Availability: Stock
                  Item #: IC7127 -

                    The 7100 Performance Pro™ Series consists of low bleed, non-phthalate, low cure* inks that can be printed on performance fabrics and other sports-related garments. Recommendations: Fabric: 100% Polyester, Poly-blends, and Performance Fabrics Cure Temperature: 275°F-300°F Ink Application: 7100 Series should be used straight from the container without any modifications Additives: Not Recommended Screen Mesh: 110-230t/in monofilament Emulsion: Any direct or indirect emulsion or capillary...

                    FlexCure 741 Poly White
                    Price: $36.45
                    Availability: Stock
                    Item #: IC741 -

                      International Coatings' lowest bleed white formulated for tough to print polyester or polyester blend fabrics. (As with all low bleed inks, preprint and test all fabrics to be used for dye migration, ink adhesion, wash fastness and other desired properties before beginning any production.) The 741 Ultra Low Bleed Polyester white is part of the FlexCure line and can be cured between 275°-325°F.

                      FlexCure Paramount White
                      Price: $38.88
                      Availability: Stock
                      Item #: IC7041 -

                        7041 Ultra Low-Bleed Paramount White offers superior bleed resistance, outstanding print performance, very fast, excellent opacity and a soft hand. It is ideal for high and low mesh counts and unlike other competitive inks, 7041 Paramount White contains no bleaching agents and is non-phthalate. Excellent OpacityCreamy ViscosityUltra Low BleedLow cure (275°-325°F)Non-Phthalate (NP)Fast FlashIdeal for Low or High Mesh CountsNo Bleaching Agents ...

                        7500 Mixing System QUART Kit international coatings, 7500 series, screen printing ink
                        Price: $380.00
                        Availability: Stock
                        Item #: IC7500MS2 -

                          High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The 7500 series is very creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up.Kit Includes: 2 Quarts 7538 Mixing White 1 Pint 7519 Fl. Magenta 1 Quart 7536 Black...

                          FlexCure 717 Ultimate Black
                          Price: $19.85
                          Availability: Stock
                          Item #: IC717 -

                            717 Ultimate Black (formerly know as "Jet Black") is a high performance plastisol screen printing ink with a wide latitude for cure temperature. It can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at 325°F.  717 Ultimate Black provides a deep black color that is very creamy, short-bodied and is easy to print on automatic or manual presses. 717 Ultimate Black can produce a matte or glossy finish, depending on the amount of ink laid...

                            7500 Mixing System GALLON Kit international coatings, 7500 series, screen printing ink
                            Price: $820.00
                            Availability: Stock
                            Item #: IC7500MS5 -

                              High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The 7500 series is very creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up.Kit Includes: 2 Gallons 7538 Mixing White 1 Quart 7519 Fl. Magenta 1 Gallon 7536...

                              FlexCure Brear Navy
                              Reg: $29.16
                              Sale: $26.25
                              Availability: Stock
                              Item #: IC7608 -

                                7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

                                906 All-Pro Series Royal Blue
                                Price: $33.35
                                Availability: Stock
                                Item #: IC906 -

                                  When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F. These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the FlexCure™ Line and...

                                  7538 Mixing White NP international coatings, 7500 series, screen printing ink
                                  Price: $27.54
                                  Availability: Stock
                                  Item #: 7538 -

                                    High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The 7500 series is very creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up. Recommended Fabrics:Light colored 100% cotton or some cotton/polyester blends. Use...

                                    FlexCure Dallas Green
                                    Reg: $32.40
                                    Sale: $29.16
                                    Availability: Stock
                                    Item #: IC7672 -

                                      7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

                                      7184 Performance Pro Texas Orange
                                      Price: $33.62
                                      Availability: Stock
                                      Item #: IC7184 -

                                        The 7100 Performance Pro™ Series consists of low bleed, non-phthalate, low cure* inks that can be printed on performance fabrics and other sports-related garments. Recommendations: Fabric: 100% Polyester, Poly-blends, and Performance Fabrics Cure Temperature: 275°F-300°F Ink Application: 7100 Series should be used straight from the container without any modifications Additives: Not Recommended Screen Mesh: 110-230t/in monofilament Emulsion: Any direct or indirect emulsion or capillary...

                                        FlexCure Light Royal
                                        Reg: $30.78
                                        Sale: $27.71
                                        Availability: Stock
                                        Item #: IC7624 -

                                          7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

                                          FlexCure Maroon
                                          Reg: $34.43
                                          Sale: $30.99
                                          Availability: Stock
                                          Item #: IC7656 -

                                            7600 Series plastisol inks are ready-to-use, high performance colors formulated for high speed wet-on-wet printing. 7600 Series inks are excellent for half-tone printing and fine detail using finer mesh counts. 7600 Series inks are creamy and short-bodied with low tack. 7600 Series inks have a wide range for cure temperature and can be cured at temperatures as low as 275°F, but will not be over-cured or crack when cured at the standard 325°F. **HP inks cure at 290°F - 325°F...

                                            7168 Performance Pro Navy
                                            Price: $36.05
                                            Availability: Stock
                                            Item #: IC7168 -

                                              The 7100 Performance Pro™ Series consists of low bleed, non-phthalate, low cure* inks that can be printed on performance fabrics and other sports-related garments. Recommendations: Fabric: 100% Polyester, Poly-blends, and Performance Fabrics Cure Temperature: 275°F-300°F Ink Application: 7100 Series should be used straight from the container without any modifications Additives: Not Recommended Screen Mesh: 110-230t/in monofilament Emulsion: Any direct or indirect emulsion or capillary...

                                              784 Pro-Brite Black four color process, screen printing, inks
                                              Price: $23.94
                                              Availability: Stock
                                              Item #: 784LF -

                                                Pro-Brite Process Inks are more opaque than standard process inks. Standard process colors because they are more translucent can sometimes appear dull and thin. Pro-Brite Process Inks have more body rendering more vibrant prints.

                                                901 All-Pro Series White
                                                Price: $29.50
                                                Availability: Stock
                                                Item #: IC901 -

                                                  When it comes to hard to print nylon, the 900 series inks are recognized as the industry's best. 900 series inks are a fast flashing, two-part ink system specifically formulated for printing on nylon. It can also be used to print on Non-Woven Polypropylene Bags (NPB) without catalyst (add 6% 3804 Low Cure Additive to lower the cure temperature to 250°F.  These inks are as easy to use as conventional plastisols and extremely durable. The 900 All Pro™ Series is part of the...