Customer Reviews
Note: please allow 2-3 days for preparation of kit. 
MSRP:  $826.42
Price: $699.00
Part No: IC7500MS2
Availability: Stock





High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The 7500 series is very creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up.

Kit Includes:

2 Quarts 7538 Mixing White1 Pint 7519 Fl. Magenta
1 Quart 7536 Black1 Pint 7521 Fl. Violet
1 Quart 7503 Yellow1 Pint 7523 Fl. Blue
1 Quart 7505 Scarlet1 Pint 7525 Fl. Green
1 Quart 7507 Red1 Pint 7527 Fl. Yellow
1 Quart 7509 Violet1 Pint 7529 Fl. Lemon
1 Quart 7511 Marine Blue1 Pint 7531 Fl. Orange
1 Quart 7513 Blue A1 Pint 7533 Fl. Pink
1 Quart 7515 Blue B1 Pint 7535 Fl. Red
1 Quart 7517 Green

Software for the 7500 series mixing system. Click Here. Please remember to select the 7500 Series - Coated or 7500 Series - Uncoated when selecting your formula. This system is a ready to print system and not the concentrated system.

Recommended Fabrics:
Light colored 100% cotton or some cotton/polyester blends. Use an underbase for dark fabrics.

Ink Application:
Colors should be printed without any modifications. If thinning is required, use 1099 LB Lo-Bleed Reducer (1% to 5% by weight).

Screen Mesh:
110 to 305 Monofilament.

Any direct or indirect plastisol emulsion. Use 35 to 70 micron capillary film for best results.

60-70 Durometer: Sharp Edge. 60/90/60 or 70/90/70 Triple Durometer: Sharp Edge

Drying Temperatures:
325º (163º C) Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.

Clean Up:
Any Environmentally friendly plastisol screen wash.

Storage of Ink Containers:
Keep indoors and store in a cool area. Recommended storage at 65º F to 90º F (18º C to 32º C). Avoid storage in direct sunlight or in extreme temperature conditions.

Printable Version

Franmar Chemicals