Customer Reviews
*Pantone® Color - 123C

*The color referenced is the closest Pantone® color and is provided as a reference point but not meant for specific matching purposes. If you need a specific Pantone® color match please order a custom mixed color
Price: $45.13
Part No: IC6155
Availability: Stock

*Size:


Quantity:

Cool Sport™ Color (6100 Series) plastisol inks are newly reformulated using our proprietary CoolTech™ technology. The series features 13 bright, ready-for-use team-related colors.

CoolTech™ uses the same chemistry found in our popular Cool White™(7022). CoolTech™ adds strength, elongation, and elasticity to inks, and enables Cool Sport™ inks to be printed on multiple substrates.

Cool Sport™ Colors are part of our expanding line of FlexCure™ screen printing inks. FlexCure™ offers a ‘flexible’ curing range - from a low 275°F/135°C to the standard 325°F/163°C.

  • Brilliant, ready-for use, popular team and sport colors
  • High pigment load for maximum coverage on dark garments, thus eliminating the need for under-basing
  • Suitable for printing on a variety of substrates including 100% cotton, 50/50 blends, non-woven polypropylene and some polyesters
  • Print through higher mesh counts on light colored garments or reduce to obtain soft-hand, opaque prints Smooth, creamy and even consistency, and prints beautifully on automatic and manual printers
Technical Data Sheet (Printable Version) Color Card (Printable Version)

Recommended Fabrics:
100% cotton ,50/50 cotton/polyester blends, and Nonwoven Polypropylene Bags. 

Ink Application:
6100 Series colors should be printed without any modifications. If thinning is required, use 1099 Low Bleed Curable Reducer (1% to 3% by weight)

*Adding too much reducer or other additives to the 6100 Series inks may cause curing/fusing or increased dye migration problems

Screen Mesh: 61 to 230 t/in

Emulsion:
Any direct or indirect plastisol emulsion. For capillary film, use 35 to 70 micron for best results.

Squeegee: 60-70 Durometer, Sharp Edge

Cure Temperature:
275°F to 325°F (135°C to 163°C) entire ink film. Fusing at lower temperatures may require longer dryer retention times

*It is always recommended to test dryer temperatures and wash test the printed product before and during a production run.

Clean Up: Any eco-friendly plastisol screen wash.

Storage of Ink Containers:
Keep indoors and store in a cool area. Recommended storage at 65º F to 90º F (18º C to 32º C). Avoid storage in direct sunlight or in extreme temperature conditions.

Technical Data Sheet (Printable Version) Color Card (Printable Version)
Franmar Chemicals