Customer Reviews
*Pantone® Color - 202C

*The color referenced is the closest Pantone® color and is provided as a reference point but not meant for specific matching purposes. If you need a specific Pantone® color match please order a custom mixed color
Price: $44.18
Part No: IC6163
Availability: Stock

*Size:


Quantity:

Cool Sport™ Color (6100 Series) plastisol inks are newly reformulated using our proprietary CoolTech™ technology. The series features 13 bright, ready-for-use team-related colors.

CoolTech™ uses the same chemistry found in our popular Cool White™(7022). CoolTech™ adds strength, elongation, and elasticity to inks, and enables Cool Sport™ inks to be printed on multiple substrates.

Cool Sport™ Colors are part of our expanding line of FlexCure™ screen printing inks. FlexCure™ offers a ‘flexible’ curing range - from a low 275°F/135°C to the standard 325°F/163°C.

  • Brilliant, ready-for use, popular team and sport colors
  • High pigment load for maximum coverage on dark garments, thus eliminating the need for under-basing
  • Suitable for printing on a variety of substrates including 100% cotton, 50/50 blends, non-woven polypropylene and some polyesters
  • Print through higher mesh counts on light colored garments or reduce to obtain soft-hand, opaque prints Smooth, creamy and even consistency, and prints beautifully on automatic and manual printers
Technical Data Sheet (Printable Version) Color Card (Printable Version)

Recommended Fabrics:
100% cotton ,50/50 cotton/polyester blends, and Nonwoven Polypropylene Bags. 

Ink Application:
6100 Series colors should be printed without any modifications. If thinning is required, use 1099 Low Bleed Curable Reducer (1% to 3% by weight)

*Adding too much reducer or other additives to the 6100 Series inks may cause curing/fusing or increased dye migration problems

Screen Mesh: 61 to 230 t/in

Emulsion:
Any direct or indirect plastisol emulsion. For capillary film, use 35 to 70 micron for best results.

Squeegee: 60-70 Durometer, Sharp Edge

Cure Temperature:
275°F to 325°F (135°C to 163°C) entire ink film. Fusing at lower temperatures may require longer dryer retention times

*It is always recommended to test dryer temperatures and wash test the printed product before and during a production run.

Clean Up: Any eco-friendly plastisol screen wash.

Storage of Ink Containers:
Keep indoors and store in a cool area. Recommended storage at 65º F to 90º F (18º C to 32º C). Avoid storage in direct sunlight or in extreme temperature conditions.

Technical Data Sheet (Printable Version) Color Card (Printable Version)

Safety Data Sheet

Econojet Waterproof Inkjet Film for Screen Printers