Franmar

Franmar D-Grease Screen Degreaser is designed to clean and prepare screen printing mesh before applying fresh emulsion. It removes solvent residues and other contaminants left on the mesh, providing a clean surface for the next stage of screen preparation. Properly degreasing mesh helps prevent fish-eyes and supports good emulsion adhesion. D-Grease is a useful final cleaning step after reclaiming, helping prepare used screen printing screens to be coated and put back into production. The...

Franmar Aqua-Wash Water-Based Ink Remover is formulated specifically for screen printers working with water-based inks. It effectively cleans dried water-based ink from screens, helping recover screens that may otherwise be difficult to clean and reuse. Aqua-Wash works with all types of water-based inks and is tough on high-pigment formulations. In addition to post-production screen cleaning, it can be used as a screen opener while the screen is still on the press, making it a versatile...

Franmar Scorch-E-Doo Scorch Remover is designed to help remove unwanted scorch marks from garments caused by excessive heat during printing and decorating. It provides shops with a useful solution when fabric develops light discoloration or scorching from heat exposure. Scorch marks can occur when garments are exposed to high temperatures during production, including when using heat presses and other garment-decorating equipment. Scorch-E-Doo works directly on the affected fabric to help...

Don't know what to buy for you shop? Try two different ink degraders along with quarts of the Franmar's STRIP-e-doo (emulsion remover), D-HAZE (haze remover,) Un-Lok (screen unlocker) and D-GREASE (screen degreaser). This kit of low odor, safe, biodegradable screen cleaning products is a great way to find the best products for your shop. The Franmar Textile Kit brings together a complete selection of screen cleaning and reclaiming products for screen printing shops. Includes One (1)...

Franmar UN-Lok Screen Unlocker Quart is a specialized screen reclaiming solution formulated to remove locked emulsion from screen printing mesh. It works on all types of locked emulsion, including capillary film, providing an effective option for screens where the stencil has become difficult to remove. The gel formula is designed to stay wet for up to 24 hours, giving screen printers additional flexibility when dealing with stubborn or heavily locked areas. UN-Lok typically works within 30...

Franmar Aqua-Wash Water-Based Ink Remover is formulated specifically for cleaning water-based inks from screen printing screens. It breaks down dried water-based ink that can be difficult to remove during normal cleanup, helping screens return to production instead of being lost to dried ink buildup. Aqua-Wash works with all types of water-based inks and is tough on high-pigment formulations. It also helps minimize mesh ghosting and can be used as a screen opener while the screen is still on...

It is recommended that you generally change your dip tank solution every 3-6 months (time will vary depending on use). Franmar's Neutralizer changes the Ink + Emulsion Remover solution's pH level to neutral for a safer drain disposal.   Dispose of waste according to federal, state and local regulations. Formerly known as:One Step Powder pH: 11.4 Neutralizing Powder Product Safe Disposal for Ink + Emulsion Remover (One Step Clear)  WARNING: Cancer and Reproductive...

The Franmar Biggee Blue Scrub Pad is a hard-abrasion replacement pad designed for screen cleaning and reclaiming. It provides a more aggressive scrubbing surface for removing stubborn residue during regular screen-room cleanup. The Blue pad is the Hard option in the Biggee scrub pad lineup, alongside Red (Medium) and White (Gentle). Its higher abrasion level makes it suitable for cleaning tasks that need more scrubbing action than the softer pad options. Designed for use with the Franmar...

The Franmar Biggee Red Scrub Pad is a medium-abrasion replacement pad designed for screen cleaning and reclaiming. It provides balanced scrubbing action for removing residue during regular screen-room cleanup. The Red pad is the Medium option in the Biggee scrub pad lineup, alongside White (Gentle) and Blue (Hard). Its moderate abrasion level makes it suitable for routine cleaning tasks that require effective scrubbing without the more aggressive action of the Hard pad. Designed for use with...

The Franmar Biggee White Scrub Pad is a gentle-abrasion replacement pad designed for screen cleaning and reclaiming. It provides lighter scrubbing action for removing residue during regular screen-room cleanup. The White pad is the Gentle option in the Biggee scrub pad lineup, alongside Red (Medium) and Blue (Hard). Its lower abrasion level makes it suitable for cleaning tasks where a softer scrubbing surface is preferred. Designed for use with the Franmar Biggee Scrub Pad Handle, the pad...

The Franmar Biggee Scrub Pad Handle is a reusable screen cleaning and reclaiming tool designed for use with replaceable Biggee Scrub Pads. The handle securely holds the scrub pad, providing a convenient way to clean screen printing mesh during regular screen-room maintenance and reclaiming. Biggee Scrub Pads are available in three abrasion levels for different cleaning needs: White (Gentle), Red (Medium), and Blue (Hard). Each replacement pad attaches to the reusable handle and can be changed...