Customer Reviews
*Pantone® Color - 1655C

*The color referenced is the closest Pantone® color and is provided as a reference point but not meant for specific matching purposes.
Price: $49.50
Part No: TRI17182
Availability: Stock







Sta-True 1700 Series plastisol is is a low bleed opaque plastisol formulated for printing on 100% polyester and 50/50 polyester/cotton blends.  It allows for greater bleed  resistance than standard plastisols were dye migration can occur.

Polyester and 50/50 polyester/cotton blends.

Stock: Direct prints on knit and woven t-shirts, sweatshirts, jerseys, fleece goods, and bandanna material.

Tech Sheet

Recommended Fabrics


100% polyester and cotton/polyester blends. Always test print fabric before beginning a production run.

Ink Application


1700 Series Ink should be used right from the container without any modifications. Adding any reducers or additives can lower the bleed resistance, opacity, or increase cure times of ink. STIR the ink prior to printing on press and after addition of reducers or additives.

Screen Mesh and Emulsion


use 60-160 t/in monofilament.
any direct or indirect emulsion or capillary film in the 35 to 70 micron range, for best results.


60-70 Durometer: Sharp Edge

Cure Temperatures

315°F to 330°F  depending on ink deposit, color and dryer efficiency.  Test dryer temperatures and wash test printed product before and during a production run.


any environmentally friendly plastisol screen wash

Product Packaging

Quart, Gallon

Storage of Ink Containers

Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed

DTF Supplies