Customer Reviews
Price: $26.33
Part No: 7511
*Size:



Update price
Quantity:

High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The 7500 series is very creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up.

Recommended Fabrics:
Light colored 100% cotton or some cotton/polyester blends. Use an underbase for dark fabrics.

Recommended Fabrics:
Light colored 100% cotton or some cotton/polyester blends. Use an underbase for dark fabrics.

Ink Application:
Colors should be printed without any modifications. If thinning is required, use 1099 LB Lo-Bleed Reducer (1% to 5% by weight).

Screen Mesh:
110 to 305 Monofilament.

Emulsion:
Any direct or indirect plastisol emulsion. Use 35 to 70 micron capillary film for best results.

Squeegee:
60-70 Durometer: Sharp Edge. 60/90/60 or 70/90/70 Triple Durometer: Sharp Edge

Drying Temperatures:
325º (163º C) Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.

Clean Up:
Any Environmentally friendly plastisol screen wash.

Storage of Ink Containers:
Keep indoors and store in a cool area. Recommended storage at 65º F to 90º F (18º C to 32º C). Avoid storage in direct sunlight or in extreme temperature conditions.

Printable Version

Chromaline Best Emulsion