Heat Presses

*Transfer Platen Size: *16” x 20”Swing-Away Type Press for Easy Garment MountingAdjustable Height Caddie Stand SystemEven and Accurate Heat DistributionCenter Controlled Force Multiplier Pressure SystemHover Capability for DTG Pre-Treat ProcessAdjustable Manual Pressure SystemLCD Display with Digital Time, Temperature and Pressure DisplayIndustrial Grade Construction Provides Long DurabilityPower Requirements: 120 Volts,15 AmpsCost-Efficient and Easy to UseAvailable in F° or C° with...

An excellent choice for start-ups and home businesses. This affordable, easy-to-use cap heat press is great for decorators getting into heat printing caps and hats. With a 3.5" x 6" platen, it prints a wide variety of caps and is lightweight and portable, for mobile heat printing operations. Hold down device secures cap and creates a smooth surfaceEasy-to-read digital time and temperature display for consistent printingOptional interchangeable platens available to help print headwear of any...

The Hotronix Auto Cap Heat Press is a heat press designed specifically with caps in mind. Features: Quick change platen, with up to 4 different optionsMagnetic assist on open and lock downDigital display of temperature, time and pressureTwin Timers™-Use two programmed times for two part transfers

Stahls' Hotronix Fusion IQ™ Heat Press (16” x 20”) has everything the best-selling original Fusion heat press had to offer, but now includes new data-driven features to further increase efficiency, productivity, and proactive management in shops nationwide. The new Fusion IQ™ Heat Press offers a larger, higher resolution control panel featuring a user-friendly, highly responsive touchscreen with WiFi connection capability. The Fusion IQ™ will automatically send detailed reports to the Hotronix...

The DK7 Cap press is a fully functional cap press for printing the front face of any sized headwear.The DK7 has a unique hold-down device that pulls the rear strap of the headwear down against the pressing surface, holding the cap in place. The DK7 accepts different sized interchangeable tables (standard size included - see additional accessories below) for accommodating youth & child sized caps, fitted and low profile caps, and many other items.

The DK3 Digital Mug Press is a specialty press in the Digital Knight line of presses; exclusively for pressing mugs. This press is a full wrap-around, handle to handle, top-to-bottom printing mug press. It can press images up to 5" high, and as close as 1/2" from the handle, depending on the mug size.The DK3 is fully adjustable, accommodating all mugs available on the market. This includes 11 oz, 15 oz, 16 oz mugs, steins and stainless steel travel mugs. The ability of the press to open extra...

Our mid-sized clamshell, the 14x16 DK16 opens for full access to the lower bottom table. This press is the lowest cost solution for a business grade heavy-duty Digital heat press machine. It is important to note that the back of the heat platen raises above and away the bottom table, providing better access than other clamshell presses. The frame support allows operators to slide shirts over the table with complete drape space around and underneath the loading area. Interchangeable bottom...

The DK20A is the AUTO-RELEASE "Pop-Up" version of our largest manual clamshell. This amazing high-tech feature makes your Digital Knight clamshell act like a semi-automatic, air operated press, without the compressor! Simply close the press as you normally do, and at the end of the digital timing cycle the press releases automatically.The Auto-Release upgrade also features the "HOVER" feature. This means when the handle is lowered without fully clamping the machine, the press will hover over...

The Digital Knight DK14S is Geo Knight's most portable, lowest cost Digital Swing-Away press. The 12x14 heat platen uses the same SuperCoil-Microwinding™ heater technology with LifeTime Warranty as all other Digital Knight Swing-Away presses.The DK14S utilizes the same heavy-duty solid steel industrial grade style clamping mechanism as the DK20S and DC16, along with the same accurate and easy to use digital electronics. It also boasts the same 2" product thickness range as the rest...

The Digital Knight DK20S is a 16" x 20" swing-away heat transfer press. The DK20S combines a heavy-duty solid steel industrial grade pressing framework with accurate and easy to use electronics to provide the operator with the best possible features and equipment needed for today's various heat transfer applications.

The MaxiPress is a multipurpose large format manual heat transfer press intended for the imprinting of a vast range of different materials. The MaxiPress provides an oversized platen, production oriented press. The gas shock counter springs provide a weightless and effortless operation of the press. The Digital Knight state-of-the-art control system accurately regulates all aspects of the electrical functions of the press, freeing the operator for the main goal of material imprinting. Ideal...