AlbaChem® DFR Direct to Film Remover is specifically formulated to remove DTF (Direct to Film) transfers from garments and textiles. This powerful yet low-odor solvent blend attacks the DTF binder, allowing the printed image to be peeled or scraped away cleanly.
Designed for professional decorators and print shops, DFR makes correcting print errors faster and more cost-effective—saving garments that would otherwise be scrapped.
Water soluble and non-hazardous for shipping, DFR helps streamline DTF production while maintaining fabric integrity for reprinting.
Key Features
- Removes DTF graphics from all textile types
- Strong solvent blend penetrates DTF binder
- Low odor formula
- Water soluble
- Non-hazardous for shipping
- Allows garment correction and reprint
- Appearance: Clear, colorless liquid
- Odor: Mild solvent
- Solubility: Water soluble
- VOC Content: 50%
- HAP: No
- Ozone Depleting Substances: No
- SARA 313 Chemicals: No
- Non-Hazardous for shipping
Package Size: 20 fl. oz. (591 ml)
Case Pack: 12
Case Weight: 20.5 lbs
Recommended Use Instructions
- Apply DFR to the underside of the fabric directly beneath the DTF print area.
- Allow 1–5 minutes penetration time (3 minutes recommended for best results).
- Gently peel or scrape away the transfer.
- If needed, apply additional DFR directly to the image surface.
- Wipe away residue with a textured cloth.
- Rinse thoroughly with water and wash garment.
- Allow garment to fully dry before reprinting.
For faster drying, a heat press may be used after rinsing.