Franmar Bean-E-Doo Plastisol Ink Remover is designed to quickly degrade plastisol ink during screen cleaning and reclaiming. The 5-gallon size provides a larger supply for screen printing shops that regularly clean screen printing ink from screens and want to keep plenty of remover available in the screen room.
Bean-E-Doo works effectively with plastisol, all-purpose, and nylon jacket inks, making it a versatile option for shops working with different ink applications. Its formula does not evaporate as quickly as traditional solvents, allowing the remover to remain on the screen while it works to break down ink.
The formula is low odor, low VOC, 100% biodegradable, non-caustic, and non-hazardous. Bean-E-Doo is also economical to use, with Franmar describing it as costing only pennies per screen.
For higher-volume shops, the 5-gallon size reduces the need to frequently replace smaller containers and provides a convenient bulk supply for routine screen cleaning and reclaiming.
Keep Bean-E-Doo alongside your other screen printing chemicals to build a screen cleaning and reclaiming process that fits your shop's production needs.
Download the Brochure
Safety Data Sheet
WARNING: Surfactant contains < 0.1% of 1,4 Dioxane (CAS 123-91-1) as a manufacturing by product; a substance listed by California's Prop 65 to cause cancer. For more information go to www.P65Warnings.ca.gov
- Quickly degrades plastisol ink
-
Works with plastisol, all-purpose, and nylon jacket inks
-
Low-odor formula
-
Low VOC
-
100% biodegradable
-
Non-caustic
-
Non-hazardous
-
Does not evaporate as quickly as traditional solvents
-
Economical to use
-
5-gallon size for regular or higher-volume screen cleaning
Q: What kinds of emulsions are recommended for use with Franmar cleaners?
A: Most emulsions will work with Franmar's line of cleaners. Keep in mind that Franmar's environmentally friendly cleaners require the use of water during the clean-up process, so having an emulsion with some water resistantce is important.
Q: Franmar cleaners are softening my emulsion. Why?
A: One posible cause for this is that the emulsion is not fully cured. Another possibility is that it's not actually the cleaner softening the emulsion, but the water that is used to rinse the screen. The emulsion used needs to have some water resistance to it.