Franmar STRIP•e•doo Emulsion Remover Gallon is a biodegradable screen reclaiming solution designed to penetrate and dissolve all types of emulsion and capillary film without weakening screen printing mesh. Its combination of emulsion-removing and degreasing properties provides screen printers with an effective way to reclaim screens and prepare them for reuse.
STRIP•e•doo features a built-in degreaser that helps streamline the screen reclaiming process. Its color-changing formula also provides a convenient visual indicator during use. The product changes from white to brown when it is no longer active, making it easier to determine when the solution has finished working.
To use STRIP•e•doo, wet the screen and pour or spray a small amount onto the front side. Scrub briefly using a dedicated scrub pad, then repeat the process on the back side. Allow the product to work for at least 30 seconds before scrubbing both sides again. Do not allow STRIP•e•doo to dry on the screen. Finish by rinsing both sides thoroughly with pressurized water.
STRIP•e•doo is effective on emulsions, films, and stencils and can be incorporated into a regular screen reclaiming workflow. For high mesh counts or halftones, additional degreasing may be necessary. The product should be stored in a cool, dry place away from direct sunlight.
The gallon size provides a larger supply of STRIP•e•doo for screen printing shops that regularly reclaim screens. Its biodegradable formula, built-in degreasing action, color-changing indicator, and ability to dissolve emulsion and capillary film make it a practical addition to the screen room.
For additional screen reclaiming products, explore our emulsion removers and haze removers.
- Non-Toxic
- 100% Biodegradable
Download the Brochure
Q: Emulsion Remover is taking off some of my emulsion, but not all of it. Is the Emulsion Remover bad?
A: If the emulsion is not coming off in the thicker areas (generally the sides where the scoop coater leaves thick edges), try using more Emulsion Remover or more scrubbing. If the emulsion is not coming off in certain areas of the screen, a few different things may be occurring. First, the Emulsion Remover might be past its shelf life of 6 to 9 months. Emulsion Remover will begin to turn a light to rusty brown color when it has reached its shelf life. Second, there may be an under-curing or over-curing problem with the emulsion. Test to make sure the emulsion is being properly exposed. Third, some "hot" solvents used in cleaning (paint thinners and mineral spirits, for example) can begin to lock in emulsion. Try switching to one of Franmar's friendly ink cleaners.