Onyx Black Ink is designed for both 100% Cotton and Cotton/Polyester Blends. Onyx Black Ink is smooth and easy to print. It is a High Performance, Non-Phthalate (NP), ink formulated for printing on both manuals and automatics.
Note: This is not a Flex Cure Ink and has a standard cure temperature of 325ºF
Recommended Fabrics:
100% cotton, cotton/polyester blends, polyester. Use an underbase for dark
fabrics.
Ink Application:
Colors should be printed without any modifications. If thinning is required,
use Atlas Curable Reducer (1% to 5% by weight).
Screen Mesh:
110 to 305 Monofilament.
Emulsion:
Any direct or indirect plastisol emulsion. Use 35 to 70 micron capillary film
for best results.
Squeegee:
60-70 Durometer: Sharp Edge. 60/90/60 or 70/90/70 Triple Durometer: Sharp Edge
Drying Temperatures:
325º (163º C) Entire ink film. Test dryer temperatures and wash test printed
product before and during a production run.
Clean Up:
Any Environmentally friendly plastisol screen wash.
Storage of Ink Containers:
Keep indoors and store in a cool area. Recommended storage at 65º F to 90º F
(18º C to 32º C). Avoid storage in direct sunlight or in extreme temperature
conditions.