TS P-6 DTF Transfer Low Migration Powder is a thermoplastic polyurethane (TPU) adhesive powder designed for professional direct-to-film transfer production. Its low-migration formulation, flexible feel, and strong textile adhesion make it a versatile choice for decorators looking for consistent transfer performance across a wide range of fabrics.
The P-6 formulation activates at relatively low temperatures and creates a soft, flexible bond with good resilience and stretch. It adheres to both natural and synthetic textiles and is compatible with DTF inks and coatings used for graphic transfers.
With a controlled particle size of 80–200 microns, P-6 provides consistent powder coverage and melting characteristics during production. The powder has a melting point of approximately 176–203°F (80–95°C) and is designed to provide durable transfer performance while maintaining a softer finished feel.
STS P-6 is also OEKO-TEX® ECO PASSPORT certified, providing added confidence for professional textile decoration applications.
Note: Always cure DTF Transfers in a well ventilated area. Wear a mask when handling adhesive powder to prevent inhalation, as it can be harmful.
Recommended Heat Press Parameters
- Temperature: 230–266°F (110–130°C)
- Time: 8–15 seconds
- Pressure: 0.15–0.25 MPa
These settings are manufacturer starting points. Always test with the specific film, ink, garment, and heat press being used before beginning production.
Applications
Suitable for:
- DTF apparel transfers
- Cotton fabrics
- Polyester fabrics
- Natural and synthetic textiles
- Graphic transfers
- Textile lamination
- Attaching trims and labels
Care Instructions
- Wait 24 hours before the first wash
- Wash garments inside out
- Wash with cold water
- Use mild detergent
- Do not use bleach
- Tumble dry low or air dry
- Do not iron directly over the transfer