V-2000HD Manual Press (8 Station/8 Color)
Dimensions: 48" x 48" x 49"
Guarantee: 25 Year Warranty*
Gas Springs and Rubber Pallet Tops covered for 3 Years*
- Holds up to 21" x 28" screens
- 100% wrench-free micro adjustments
- Steel Pallets w/rubber top
- Floating Head, three point bearing lock allows multiple heads down
- Micro-registration
- 6 way head leveling
- Accurate multicolor registration
- High-Strength Rotor Arm Assembly
Econored-II 54" Conveyor Dryer - View Control Panel
Dimensions: 87" x 73.5" x 53"
Electric: 240V, 14400W, 64A, 1 Phase, 3 wire 50/60HZ
Belt Width: 54"
Chamber Length: 36"
Production: 600+ Shirts/Hr* (plastisol)
Guarantee: 15 Year Heater Warranty*
- 54" Synthetic coated fiberglass belt with tracking system
- 2" - 7" belt-to-heater clearance, adjustable separately on each side allows you to tilt the heating element (great for hats!)
- Focused Exhaust Air System evacuates fumes and moisture quickly
- Heavy Duty "X-Series" Conveyor Belt Tracking System
- Heavy duty DC belt speed motor with digital voltage display
- Digital PID temperature controller is accurate to +/-1°F
- Focused Exhaust Air System evacuates fumes and moisture quickly
- Engineered to be shorter and smaller with high heat and production
** Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.
E-2000 LED Exposure Unit (23" x 31")
Electric: 120V, 60 HZ, 3.5A, NEMA 5-15P
Bulbs: (5) 30" LED light bars
Dimensions: 41.6" x 36.2" x 48.3" (Lid Closed)
41.6" x 36.2" x 68.2" (Lid Open)
Guarantee: 3 Year Warranty* (excludes rubber blanket)
- Max screen size is 23" x 31"
- Expose screens 10-15 times faster than fluorescent bulbs
- Bulb life expectancy 50,000-100,000 hours
- Operates at 20% of the power required for metal halide
- Expose very fine details and halftones
- Single button operation for both vacuum and lights
- Independent controls to adjust vacuum draw and exposure time
- Power vacuum hold down contours rubber blanket to screen for excellent screen-to-film contact
- Dependable .25" tempered glass virtually eliminates breakage
- Vacuum
Pump, Oil-less Diaphragm (1/16 HP 24 hg Max)
Dri-Vault Screen Drying Cabinet (10 Screen Capacity)
Max Screen Capacity:
(10) 25" x 36" frames
Smallest Screen Width: 18"
Electric: 120V, 1250W, 12A, 1 Phase, 60Hz, NEMA 5-15P
Overall Dimensions: 39.5" x 34.75" x 29"
Guarantee: 3 Year Warranty*
- One (1) 200 CFM (5.7 CMM) air flow blower
- Pressurized cabin with positive air flow keeps out contaminants even if an air leak occurs
- Sealed latching door
- Hi-Lo heat adjustment
- Dries emulsion in as little as 20min.**
- 4" Exhaust duct for removing contaminated air
**Drying times will vary. Humidity, thickness and type of emulsion used, and size of screens are factors in Dri-Vault curing time.
RedFlash 240V Flash Cure Unit (18" x 18") - View Controls
Electric: 240V, 9A, 2600W, NEMA 6-15P
Guarantee: 15 Year Heater Warranty*
3 Year Bumper-to-Bumper Warranty*
- Unit Warm-Up Time: 6 minutes
- 18" x 18" 2600 Watt IR Heater
- Diagnostic pilot lights & heat control
- Heavy duty side handles
- Locking casters
- Head leveler, cooling fan and air curtains
- Ultra slim profile - 2.75" height head
- Head rotates 360°
- Adjustable height
- Adjustable heat control
- Anti-rust treatment on all painted steel
- Flash plastisol in 7-10 seconds
AutoFlash Upgrade Features:
The AutoFlash upgrade rotates the head of the flash cure unit into place above the pallet with the touch of a foot pedal, and automatically rotates the head away from the pallet after a user-adjustable dwell time has elapsed, to prevent burning and under-flashing of garments that occurs when operators become distracted.
A new Breakaway Detent feature stops the head from rotating if it encounters an obstacle, maximizing operator safety while minimizing damage to the flash cure head, the AutoFlash gearbox and/or the screen printing press.
*on manufacturer's defects