These flip racks have non-warping metal trays with patented, non-locking rubber feet. The
racks are supported by a reinforced steel framework, and move easily on
ball-bearing casters.
The trays rest flat when down, spaced 1-1/8" (28 mm) apart. They nest
together when up, to permit a wider opening, and won't tangle.
The Heavy-Duty Drying Rack, formerly the Mark VI Multi-Rack, features adjustable steel springs that permit tension
setting as desired. The springs hold the trays in the up position for
loading or unloading. The racks are easy to load from bottom to top.
Sheets can overhang if retained 6" from the back.
The height is 62" (157 cm) with the trays down, and 86" (218 cm) with
the trays up. The racks are strong enough to hold glass, lightweight
metal, or plastic sheeting. They ship unassembled by truck. Instructions
are included.
- Tray Extenders - Increases effective tray capacity
- Patented Rubber Feet - Molded parts do not break like welded pieces of pipe also facilitate counting
- Floating Bar -Improved design ensures even spring tension and ease of assembly
- Galvanized wire - Electroplating provides better surface than paint or other coating
Optional: Double-Spaced Racks (Increases tray spacing from 1-1/8 " to 2-ΒΌ" for thicker objects)
Available Models and their Dimensions & Capacity
MR2232-40: 22" x 32" / 40 Trays
MR2232-50: 22" x 32" / 50 Trays
MR3248-40: 32" x 48" / 40 Trays
MR3248-50: 32" x 48" / 50 Trays
MR4333: 43" x 33" / 50 Trays
MR4052: 40" x 52" / 50 Trays
MR4569: 45" x 69" / 50 Trays
MR5269: 52" x 69" / 50 Trays
MR5281: 52" x 81" / 50 Trays