Franmar STRIP•e•doo Concentrate Emulsion Remover (8 oz) is a concentrated screen reclaiming solution designed to penetrate and dissolve emulsions and capillary films without weakening screen printing mesh. Its concentrated formula provides the reclaiming performance of STRIP•e•doo in a compact format that can be diluted with water as needed.
STRIP•e•doo Concentrate features a built-in degreaser to help simplify the screen reclaiming process. The formula is biodegradable and works on emulsions, capillary films, and stencils, making it a versatile option for reclaiming screen printing screens.
For best results, dilute 1 part STRIP•e•doo Concentrate with 19 parts water. The 8 oz bottle makes 1 gallon of emulsion remover, giving screen printers a convenient way to prepare reclaiming solution without storing a full gallon of product concentrate.
To reclaim a screen, wet the mesh and pour or spray a small amount of the diluted solution onto both sides. Scrub both sides thoroughly with a dedicated scrub pad, allow the product to work for 30–60 seconds, and scrub both sides again. Rinse the screen clean with pressurized water, and do not allow the product to dry on the emulsion.
STRIP•e•doo Concentrate combines concentrated emulsion removal with built-in degreasing action for an efficient screen reclaiming workflow. Its ability to remove emulsions and capillary films without weakening the mesh makes it a practical choice for shops looking to mix emulsion remover as needed.
For additional screen reclaiming products, explore our emulsion removers and haze removers
- Non-Toxic
- 100% Biodegradable
Download the Brochure
Q: Emulsion Remover is taking off some of my emulsion, but not all of it. Is the Emulsion Remover bad?
A: If the emulsion is not coming off in the thicker areas (generally the sides where the scoop coater leaves thick edges), try using more Emulsion Remover or more scrubbing. If the emulsion is not coming off in certain areas of the screen, a few different things may be occurring. First, the Emulsion Remover might be past its shelf life of 6 to 9 months. Emulsion Remover will begin to turn a light to rusty brown color when it has reached its shelf life. Second, there may be an under-curing or over-curing problem with the emulsion. Test to make sure the emulsion is being properly exposed. Third, some "hot" solvents used in cleaning (paint thinners and mineral spirits, for example) can begin to lock in emulsion. Try switching to one of Franmar's friendly ink cleaners.