The AlbaChem® VENTA-TM Table Top Cleaning Station is a compact, powerful spot cleaning system designed for use with electric spot cleaning guns. Its strong vacuum motor draws cleaning fluid fumes away from the operator while drying the fabric quickly and completely, helping create a cleaner and safer spotting workspace. Fast drying also helps reduce or eliminate the “rings” or “circles” that can appear when spot cleaning certain fabrics.
The vacuum action helps hold the fabric in place during cleaning, pulls stains away from the fabric, and reduces operator exposure to cleaning fluid fumes. Built with heavy gauge steel construction and a stainless steel cleaning arm, the VENTA-TM is designed for durability in busy production environments. Its compact footprint makes it a strong choice for shops with limited space, including screen printers, embroiderers, contractors, retailers, and others needing an efficient tabletop spotting station.
Features
- Compact, powerful table top spot cleaning system
- Designed for use with electric spot cleaning guns
- Removes possible harmful fumes from the workplace
- Dries fabric quickly and completely
- Helps reduce or eliminate spotting rings and circles
- Vacuum action holds fabric in place during cleaning
- Helps pull stains away from the fabric
- Provides a clean workspace for spotting
- Heavy gauge steel construction
- Stainless steel cleaning arm (buck)
- Narrow buck design for sleeves, hosiery, and pant legs
- Good fit for locations with limited space
- Made in Italy
Electric: 110-20V, 60 Hz.
(questions and answers are moderated and will appear later)
How does this exhaust?
The Albatross TM Spot Cleaning Ventilation System exhausts through the side. The unit has a built-in exhaust opening, but it does not vent directly outdoors unless ducting is attached.
To exhaust the fumes outside the shop, you would need to connect flexible exhaust tubing or ductwork to that side outlet and route it to an approved outside vent or another properly ventilated area. The duct size (3.5") would need to match the diameter of the outlet, and the run should be kept as short and unrestricted as possible for best airflow.