Customer Reviews
Price: $33.60
Part No: GNS45002
SIZE:



Update price
Quantity:

High Performance, Non-Phthalate (NP), Low Bleed (LB) plastisol formulated for Ultra high speed wet-on-wet automatic printing. The New Atlas ink line is formulated using International Coatings 7500 series ink. It is creamy and short bodied ink with low tack that is easy to print. It is well suited for fine detail and halftone printing using finer mesh counts. The 7500 Series can achieve faster production speeds with less pressure and it is extremely resistant to ink build-up.

Please Note: This ink has been reformulated using the International Coatings 7500 Series Line. Color shifts may occur if switching from our previous ink line.

Recommended Fabrics:
100% cotton, cotton/polyester blends, polyester. Use an underbase for dark fabrics.
Ink Application:
Colors should be printed without any modifications. If thinning is required, use 1099 LB Lo-Bleed Reducer (1% to 5% by weight).
Screen Mesh:
110 to 305 Monofilament.
Emulsion:
Any direct or indirect plastisol emulsion. Use 35 to 70 micron capillary film for best results.
Squeegee:
60-70 Durometer: Sharp Edge. 60/90/60 or 70/90/70 Triple Durometer: Sharp Edge
Drying Temperatures:
325º (163º C) Entire ink film. Test dryer temperatures and wash test printed product before and during a production run.
Clean Up:
Any Environmentally friendly plastisol screen wash.
Storage of Ink Containers:
Keep indoors and store in a cool area. Recommended storage at 65º F to 90º F (18º C to 32º C). Avoid storage in direct sunlight or in extreme temperature conditions.

Water-Based Ink Starter Kits on Sale