Hydro-X (BLUE) is a water-resistant hybrid photopolymer screen printing emulsion formulated for use with plastisol inks, water-based inks, and discharge inks. Optimized for LED exposure systems, Hydro-X delivers very fast exposure, increased durability, and excellent resistance to humid environments. Its ready-to-use formula does not require diazo addition, helping simplify screen preparation while delivering dependable stencil performance. The preferred coating method is 1x1.
Hydro-X (BLUE) has a blue appearance, 48% solids, and 13,000 CPS viscosity. It should be stored in its original container between 60°F and 80°F (16°C–27°C). Protect the emulsion from freezing, as Hydro-X is not freeze/thaw stable.
Before coating, clean and degrease the screen mesh to ensure proper adhesion. Apply the emulsion evenly using a quality Scoop Coater, then allow coated screens to dry completely in a clean, dark environment before exposure. Exposure times should be established using a 10-Step Exposure Guide or Exposure Calculator based on your mesh count, coating thickness, and exposure unit.
Once printing is complete, reclaim screens using a quality Emulsion Remover following the manufacturer's recommendations.
Looking for a smaller size? Hydro-X (BLUE) Emulsion Quart offers the same dependable performance in a convenient quart size for smaller production runs.
Not sure which emulsion is right for your shop? Read our Best Screen Printing Emulsion Guide to compare diazo emulsions, dual-cure emulsions, and photopolymer emulsions and choose the best option for your screen printing application.
User Guide - English
Guía del Usuario- Español
Overall Customer Rating of 1 Reviews: