Franmar STRIP•e•doo Concentrate Emulsion Remover 1 Gallon is a super-concentrated screen reclaiming solution designed to penetrate and dissolve emulsions and capillary films without weakening screen printing mesh. Its concentrated format allows screen printing shops to mix emulsion remover as needed while providing a larger supply for regular screen reclaiming.
STRIP•e•doo Concentrate breaks down tough emulsions, capillary films, and stencils while providing built-in degreasing action. The formula is biodegradable and combines emulsion removal and degreasing in one product to help streamline the process of preparing screens for reuse.
For best results, mix 1 part STRIP•e•doo Concentrate with 19 parts water. At this dilution ratio, the 1-gallon container makes 20 gallons of emulsion remover, providing a high-volume option for screen printing shops that regularly reclaim screens.
Once diluted, apply STRIP•e•doo Concentrate as part of the regular screen reclaiming process. Wet the screen and apply the mixed solution to both sides of the mesh. Scrub both sides with a dedicated scrub pad, allow the solution time to penetrate the stencil, and scrub again before thoroughly rinsing with pressurized water. Do not allow the emulsion remover to dry on the screen.
The 1-gallon concentrate size is well suited for higher-volume screen reclaiming operations that need a larger supply of emulsion remover while maintaining the storage advantages of a concentrated product. Its ability to remove emulsions, capillary films, and stencils, combined with built-in degreasing action, makes STRIP•e•doo Concentrate a versatile addition to the screen room.
For additional screen reclaiming products, explore our emulsion removers and haze removers.
- Non-Toxic
- 100% Biodegradable
Download the Brochure
Q: Emulsion Remover is taking off some of my emulsion, but not all of it. Is the Emulsion Remover bad?
A: If the emulsion is not coming off in the thicker areas (generally the sides where the scoop coater leaves thick edges), try using more Emulsion Remover or more scrubbing. If the emulsion is not coming off in certain areas of the screen, a few different things may be occurring. First, the Emulsion Remover might be past its shelf life of 6 to 9 months. Emulsion Remover will begin to turn a light to rusty brown color when it has reached its shelf life. Second, there may be an under-curing or over-curing problem with the emulsion. Test to make sure the emulsion is being properly exposed. Third, some "hot" solvents used in cleaning (paint thinners and mineral spirits, for example) can begin to lock in emulsion. Try switching to one of Franmar's friendly ink cleaners.