ThermoFlex® Xtra is specially designed for decorating nylon, leather and other heat-sensitive surfaces.
ThermoFlex® Xtra has incorporated the most desirable features of
ThermoFlex® Plus: easy handling, cutting and weeding but with a thicker
polyester carrier sheet and a low-tack carrier adhesive, enabling easy
weeding without lifting the cut image from the carrier.
ThermoFlex® Xtra will also adhere to some silicon-coated materials with
sufficient surface texture to permit the adhesive to grip when
transferred according to directions.
Columbia Blue, Antique Silver and Old Gold will not layer. These colors
cannot have layers adhered on top of them, although we have successfully
layered these products on top of other colors.
Use settings for Thermoflex PLUS for application to dazzle cloth, shiny polyester or moisture-wicking materials.
Please be advised that dye migration has occurred with low energy dyes in polyester and poly-blend fabrics.
Adheres to Nylon, Leather, Rayon, and other heat-sensitive fabrics
Be advised that dye migration has occurred with low
energy dyes in polyester and poly-blend fabrics. Due to UV Rays,
yellowing may occur on the white Xtra's adhesive, but will not affect
Instructions for application to moisture-wicking materials:
Damp a cloth with rubbing alcohol (isopropyl alcohol), then rub it into the area on the garment
you want to apply your design. Allow it to dry and apply your material. This will allow better
adhesion to the garment.
Instructions for application to dazzle cloth and shiny polyester:
We highly recommend that you TEST prior to doing large runs. Coated polyester can routinely
cause adhesion issues.