Customer Reviews
MSRP:  $3,431.00
Part No: VXEC1
Availability: Discontinued



Optional Additions:

EconoRed I conveyor dryers are compact productions dryers, making them an excellent choice for small- to medium-sized shops. EconoRed I comes with a 30" wide belt and new 4300 watt heater (up from 3500 watts) capable of curing 190+ pieces*/per hour/per chamber.

As of 2013, all EconoRed I dryers are also equipped with an Exhaust System that cools the outer cabinet while evacuating moisture and fumes; and a Digital Readout that displays DC volts, allowing you to accurately repeat or fine-tune drying results at any future time.

*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.

Electric: 240V / 19A / 1 Phase / 3 wire 50/60HZ (3 wire = 2 hot - 1 ground)

*** Wire and plug not included. Terminal block provided for on-site electrical hookup. Must adhere to local regulations. Consult licensed electrician. ***

Production: 190+ Plastisol Shirts/Hour*
Belt Width:
Belt Speed:
1-12 FPM
Overall Dimensions:
(L x W x H) 66" x 43" x 46"
Chamber Length:
Chamber In-Feed Width: 34.5"
Chamber In-Feed Height: 2" - 7" (adjustable)
Heater Dimensions: 18" x 24"
Heater Wattage: 4,300 watts

  • "X-Series" Conveyor Belt Tracking System with 30" wide PTFE coated belt
  • Infrared Focusing System: 2" - 7" belt-to-heater clearance, adjustable separately on each side for each heater
  • DC belt speed motor with digital voltage display
  • Digital PID Temperature controller is accurate to +/-1°F
  • 3 Year Defect Warranty
  • 15 Year Heater Warranty


  • Belt Extensions (18" or 36")
  • Scrub Air (forced hot air) — ideal for delicate materials
    (Additional Electric: 120V or 240V, 1A - with grounded plug)
  • Wheel set with locking casters for easy mobility
  • Hat Support Rail

Call (800) 621-4173 for more information regarding additional options and heating chambers. Such as the exhaust hood, low friction belt aligner (recommended for longer conveyor belts), and heavy duty belt motor (also recommended for longer conveyor belts).

*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.

What is the Infrared Focusing System?

Infrared emitters have an optimal distance at which they operate most efficiently. If the emitter is too far away energy is wasted and lost in the distance. If the emitter is too close the substrate may come in contact with the emitter surface. Adjusting the heater height is an absolute necessity if the products that you print vary in height. We want to maintain an approximate distance of 2 1/2" from heater surface to ink.

Vastex Screen Printing Equipment