Glacier White is a high opacity, bleed resistant ink specifically formulate to prevent dye migration on cotton/poly blends. Its creamy consistency allows this product to work well on automatic presses without any buildup concerns. Very versatile ink that can be used as an underbase, stand alone or highlight white.
Recommended Fabrics |
| polyester and cotton/polyester blends. Always test print fabric before beginning a production run. |
Ink Application | | 1705 Low Bleed Glacier White should be used right from the
container without any modifications. Adding any reducers or additives can
lower the bleed resistance, opacity, or increase cure times of ink. STIR
the ink prior to printing on press and after addition of reducers or additives. |
Screen Mesh and Emulsion | | use 96-230 t/in monofilament. any direct or indirect emulsion or capillary film in the 35 to 70 micron range,
for best results. |
Squeegee | | 60-70 Durometer: Sharp Edge |
Cure Temperatures | | 315°F to 330°F depending on ink deposit, color and dryer efficiency. Test dryer
temperatures and wash test printed product before and during a production run. |
Clean-up | | any environmentally friendly plastisol screen
wash |
Product Packaging | | 1 Gallon |
Storage of Ink Containers | | Recommend storage at 65°F to 90°F (18°C to
32°C). Avoid storage in direct sunlight. Keep containers well sealed |