Product Information
PP 81 is a high gloss acrylic-based ink with good outdoor durability.
PP 81 has numerous uses for many substrates including but not limited to
ABS, Coroplast, corona treated polyethylene and polypropylene. PP81 is
formulated with non-leaded pigments and exhibits a durable, mar
resistant finish.
Shipping Information: Please note product cannot ship air or international. This includes UPS Red, UPS Blue or UPS 3 Day Select. This product can not ship to Canada, Puerto Rico, Alaska, or Hawaii.
This product drop ships from Oshkosh, WI 54901
Substrates:
ABS, Acrylic, paper, Mylar, Vinyls, and Pressure Sensitive Vinyls.
Mesh:
230-260 Monofilament polyester
Squeegee:
60-80 durometer
Stencil:
Solvent resistant capillary films – dual cure direct emulsion.
Drying:
Air dries in 30 minutes at 72ºF; jet dries in 30 seconds at 110ºF.
Storage:
Store tightly sealed between 60º and 90ºF.
Modification:
For best results PP-81 can be reduced with 805 or 805 A Reducer by
10-20% by weight. Should you experience in screen drying 810 retarder is
recommended at a rate of 10-20% by weight . This series should be
stored in a tightly sealed container after use.
Notes:
Do not use Bronze Metallic inks if outdoor durability is required. For
outdoor use, consider the use of pearlescent inks. Print
phosphorescent, fluorescent, and pearlescent over white background for
optimum color. Certain vinyls may be incompatible, always pre-test
before full-scale production. See Metallic Color Card for proper mesh
requirements.