Ghost & Haze Removers

Haze Free Ghost and Haze Remover

• Specially formulated to remove imbedded U.V. and plastisol inks (haze and ghost images) that remain on the screen.
• Emulsifies and dissolves the ink constituents; resins, binders, pigments, plasticizers, etc.
• The solution suspends these constituents so re-attachment to the mesh surface is prohibited, thus allowing for water-rinse removal.
• Excellent degreaser, as it also removes dirt, residues and sizing.

Haze Out Haze Remover

• Non-hazardous, Non-caustic

• Removes embedded UV and Plastisol ink which remain after ink and emulsion removal

• Does not contain any sodium periodate or periodic acid

• Excellent degreaser, as it also removes dirt, residues and sizing

Haze Remover Paste

• Removes Imbedded Ink, Haze and Ghost Images
• Rinses off with High Pressure Water
• Very low V.O.C.'s
• Can be left on screen for longer period of time for difficult haze & ghost images

HR2800 Haze Remover    ***Quart quantity ships ORM-D and is not subject to UPS Hazardous Charge

• Specially formulated thick liquid to remove imbedded U.V., conventional and plastisol inks (haze / ghost images) that remain on the screen following emulsion removal

• HR2800 effectively lifts the haze and imbedded ink from the mesh then emulsifies and dissolves the ink constituents; resins, binders, pigments, plasticizers, etc.

• The solution suspends these constituents so reattachment to the mesh surface is prohibited, thus allowing for water-rinse removal

• Excellent degreaser, as it also removes dirt and residue

ICC 858 Haze Remover

Stain Removal and Degreasing – your finishing step takes out any residual stain or ghosting, leaving your screen degreased, like new and ready to use again.  Stencils adhere readily to mesh cleaned with 858.

• Non-Caustic formula is safer to handle
• Easier on mesh than highly caustic solutions
• Renews hardened mesh with degreasing action as it removes all traces of stains.

ICC 938 Blue/MAC Stain Remover and Degreaser

Blue MAC is a Mechanically Accelerated Cleaner which eliminates stains other cleaners leave behind. It not only attacks the stain chemically but mechanically as well, without any damage to the mesh.

Simply apply Blue MAC to your dry mesh using a shop towel. Then allow to dwell for 10 minutes. A high pressure rinse followed by a low pressure flood rinse should leave your screen stain free, degreased, and ready for coating.

ICC 8332 Haze Remover

Liquid Haze Remover. Very fast acting multi-stain, haze remover. 3-5 minute dwell time.