QMX-1130 White Base is a mixing white created specifically for wet-on-wet printing for use in the QMX Mixing System.
Higher mesh counts may be used with a
possible loss of opacity.
70 or 70/90/70 Durometer, Straight Edge
Any direct emulsion or capillary film
325˚F (162˚C) entire ink film, over a 60-90 second period, depending on oven type and thickness of ink deposit.
A thicker deposit will take
longer to cure as the heat must penetrate through the entire ink layer.
Any environmentally safe plastisol screen wash
Product Data Sheet