Plastisol Ink

155 Crystalina Shimmer is a translucent, iridescent glitter flake in a very clear base. It is a press-ready plastisol used for creating special sparkling effects on garments. 155 Crystalina Shimmer is bleed resistant and can be used on some synthetic fabrics or blends. Non-PVC, Non-Phthalate ink.

Crystalina Shimmer is a translucent, iridescent glitter flake in a very clear base. It is a press-ready plastisol used for creating special sparkling effects on garments. 

International Coatings Metallic Shimmer Plastisol Inks are formulated for direct screen applications on textiles. IC Metallic Inks add a bright non-tarnishing metallic sparkle to garments.

International Coatings Metallic Shimmer Plastisol Inks are formulated for direct screen applications on textiles. IC Metallic Inks add a bright non-tarnishing metallic sparkle to garments.

92 Metallic Gold is a plastisol based product that produces a "chrome" metallic look when printed. 92 Metallic Gold produces the best look when directly printed onto a garment or fabric. 92 Metallic Gold comes ready for use and should be printed without modification. Stir ink well prior to each use. For best visual results, this ink should be printed last in a design.Not a low bleed product.

96 Metallic Silver is a plastisol based product that produces a "chrome" metallic look when printed. 96 Metallic Silver produces the best look when directly printed onto a garment or fabric with no under base.96 Metallic Silver comes ready for use and should be printed without modification. Stir ink well prior to each use. For best visual results, this ink should be printed last in a design.Not a low bleed product.

Atlas Copper Shimmer provides a bright metallic effect.  Stir ink well prior to each use. For best visual results, this ink should be printed last in a design.

Optilux™ is the most powerful and brightest reflective ink system on the market. Optilux™ 507 can be printed through fine meshes so printers realize substantially improved yields and fine detail and definition. The Optilux™ 507 Plastisol can be printed on a wide variety of substrates.Optilux™ 507 Enhanced Reflective Plastisol is an easy to print, two part, retro-reflective ink that contains light-reflecting microspheres. When a garment printed with Optilux™ 507 ink is exposed to a focused beam...

1811 Non-PVC, Non-Phthalate Granite Base™ is a versatile ink that dries to form a granite or vinyl-like substrate that can be used alone or in combination with other products to create various textures and special printing effects. 1811 Non-PVC, Non-Phthalate Granite Base™ can be printed on light or dark fabrics, as a flat print or a high density print, producing a wide variety of textured effects and surfaces. 1811 Non-PVC, Non-Phthalate Granite Base™ can further be enhanced...

Atlas Anti-Bleeding Gray is a bleed blocking ink that can be used as an underbase for  polyester or other textile fabrics where dye migration is a severe problem. For use on 100% polyester, or polyester/cotton blends High-pigmented, very opaque ink Very creamyPhthalate-free

1110 NP (Non-Phthalate) Curable reducer lowers the viscosity of plastisol inks without affecting the fusing characteristics.  When adding reducers to any plastisol ink, use a minimal amount of reducer to help maintain opacity. The recommended proportion of 1110 reducer to ink is 1% to 10% by weight. Please Note: 1110 reducer should not be used in low bleed inks as it can lower the bleed resistance of those type inks. ...

Tri-Flex 1180-51 is recommended for use with the Triangles white inks, this is formulated for reducing the viscosity of the white inks quickly with small amounts. This product will reduce both viscosity and tact in any ink, it is recommended not to exceed 10-15% by weight as the more you use it will have an effect on opacity of the ink. The recommended 10% will reduce the white’s viscosity with minimal loss of opacity. This product can also be used with the Tri-Flex...

Atlas Curable Reducer will lower the viscosity of plastisol inks without affecting the fusing characteristics.  It is recommended to use 1% to 10% by weight.  In order to maintain opacity it is also recommended to use the minimal amount possible.Please Note: Atlas Curable Reducer should not be used in low bleed inks as it can lower the bleed resistance of those type inks. ...

3804 PF (Phthalate Free) Low Cure Additive lowers the curing or fusion temperatures of most plastisol based inks to less than 300°F (149°C). Use the 3804 PF Low Cure Additive when printing onto temperature and color sensitive fabrics such as 100% polyester or non-woven polypropylene bags.  Recommended addition of 5% to 6% by weight. To obtain optimum performance, the additive must be thoroughly dispersed into the ink being modified. For use on 100% cotton, poly/cotton blends, and 100%...

Atlas Transfer Powder is a finely ground adhesive resin specifically manufactured to increase heat transfer opacity and adhesion. To apply, screen print mirror image onto transfer paper, generously sift Atlas Transfer Powder over entire image, hold paper by edge and allow excess powder to fall off.  Tech Sheet Size: 2.5lbs Container ...

3801LF Foil Adhesive is a clear adhesive used to produce brilliant metallic foil designs on textiles. The adhesive can be printed directly onto the fabric or directly on the foil as a conventional transfer. Designs made with 3801LF adhesive may be applied to light or dark fabrics.

3802LF Foil Resist Additive can be mixed with most standard plastisols to make the ink resist foil during application of the foil in a heat press.  Add a maximum 10% to 15% by weight. For best foil application results, it is important to heat apply foil within 24 hours of printing and while the print is warm.

3805LF Super Stretch Clear is a specially formulated non-phthalate plastisol ink which provides exceptional stretch properties. Used as a stretch additive, it increases the elongation properties of plastisol inks. 3805LF can be used as a foil adhesive, clear carrier for PVC or glass beads. This product can also be used as an overprint to produce a glossy/wet looking finish to your prints. As an additive, add 10% to 25% to any plastisol ink to improve the stretch and elongation characteristics...

New and Improved Formula! 7043 Guardian Gray is a bleed blocking non-phthalate plastisol underbase for use on 100% polyester or other textile fabrics where dye migration is a severe problem.  For use on 100% polyester, polyester/cotton blends, and sublimated dyed fabricsHigh-pigmented, very opaque ink Very creamy, short bodied ink, with low tack for ease of printing Cures between 275°F-325°F for 1 minuteNon-Phthalate ...

720 Softhand Clear Base is a super clear, curable extender base plastisol. This product is formulated to soften, extend and increase flow characteristics of most plastisol inks. How to Use 720 Softhand Clear 720 Softhand Clear Base can be added to the 700 Series, Multipurpose, 1100 Series, 7600 Series and 800 Series inks for improved hand, cost and printability. 720 is very clear and is highly recommended for extending any process color, especially the Pro-Brite™ Process Colors. For a...

3809 FX Gel Gloss Clear is a non-phthalate plastisol based ink that produces a "wet" look when printed on top of other flashed plastisol inks.  FX Gel Gloss Clear can be used as a low tack glitter base for a “dry-look” or hand dipped effect.  FX Gel Gloss Clear can also be used as a clear carrier/adhesive for PVC or glass caviar beads. 3809 and Foil ...