Nylon (with Catalyst), 100% Cotton (without Catalyst), Some 50/50 Cotton/Poly Blends & Non-woven Polypropylene Bags (NPB).
900 Series Nylon Ink must be mixed with the 900 Catalyst before printing, for adhesion to Nylon substrates. For NPB, catalyst is not necessary.
If modification is necessary, use 1% to 5% by weight of 1110 Curable Reducer. For non-woven polypropylene bags (NPB), 3804 Low Cure Additive can be added up to 6% by weight to lower cure temperature to 250°F.
86-305 t/in Monofilament
Any direct or indirect emulsion or capillary film in the 35 to 70 micron range
70-80 Durometer, Sharp Edge
275°F to 325°F entire ink film; Cure temperature drops to 250°F when adding 6% 3804 Low Cure Additive
Any eco-friendly plastisol screen wash
Storage of Ink Containers:
65° to 90°F. Avoid storage in direct sunlight. Keep containers well sealed.