Geo Preview White is a low-cost, high-performance white ink for both manual and automatic water-based printers. Geo Preview White offers high opacity, great coverage, fast curing, and excellent bleed resistance. Geo Preview White can be used as an underbase or a stand-alone white when printing on 100% cotton fabrics. PVC, Phthalate, and Formaldehyde Free.
Suitable Additives: Hydracryl Retarder (mix 3-5% by weight) can be added to further improve hydration of the ink during printing, Hydra Reducer 120 (mix 3% by weight) to reduce viscosity of white ink, and Unifix-LC (3-5% by weight) to ensure proper resistance to frequent washes at high temperatures and lowers the cure temperature of the ink. All additives are formaldehyde and phthalate free.
Technical Data Sheet
*Always test print fabric and wash for durability prior to a production run.
Ink should be printed right from the container, without modification. If additives are needed, select from the suitable additives below (all additives listed are Formaldehyde and Phthalate Free):
- Hydracryl Retarder (add 3-5% by weight) to further improve hydration of ink when printing at the press
- Unifix-LC (add 3% by weight) to improve wash resistance and lower cure temperature
- Hydra Reducer 120 (add 3% by weight) to reduce viscosity
125 - 305 t/in
Any direct or indirect water resistant emulsion
Recommended: CP Tex Emulsion, for use with water based and plastisol inks.
60/90/60 or 70/90/70 Durometer Squeegee, Sharp Edge, 20° Angle
320°F (160°C) entire ink film for 1.5 minutes
ReadyWash™ Ink Degradent specifically designed for water based inks
Recommended storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed.
**Recommended Pallet Adhesive: ReadyTack™ Pallet Adhesive is designed to be used with water based, discharge and plastisol inks. ReadyTack™ is more cost-effective than aerosol adhesives and will not break down while printing with water based inks, unlike other adhesives available on the market.***