Geo Eco SuperStar Gold is a gold shimmer water-based ink. It is not a fine glitter, not even a metallic powder, but milled aluminum. The aluminum particles allow a superb shimmer effect and assure great brightness.
Technical Data Sheet (Watch the Video Tutorial: "How to Read a TDS")
Recommended Fabrics
100% Cotton
Ink Application
Ink should be printed right from the container, without modification. If additives are needed, select from the suitable additives below (all additives listed are Formaldehyde and Phthalate Free):
- Reduce Viscosity: Add 3% of HYDRA REDUCER 120
- Improve Wash Resistance: Add 3% UNIVERSAL FIX
- Further Improve Screen Stability: Add 3-5% HYDRACRYL RETARDER
Mesh Count
Up to 80 t/in
Emulsion
Any direct or indirect water resistant emulsion
Recommended: CP Tex Emulsion, for use with water based and plastisol inks.
Squeegee
60 or 70 Durometer Squeegee, Sharp Edge, 20° Angle
Cure Temperature
320°F (160°C) entire ink film for 2 minutes
Clean-Up
ReadyWash™ Ink Degradent specifically designed for water based inks
Storage
Recommended storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed.
**Recommended Pallet Adhesive: ReadyTack™ Pallet Adhesive is designed to be used with water based, discharge and plastisol inks. ReadyTack™ is more cost-effective than aerosol adhesives and will not break down while printing with water based inks, unlike other adhesives available on the market.***