High production dryer for mid to large sized shops that need outputs of
300* or 600* pcs/hr/chamber. A compact powerhouse with many advanced
features such as: digital temperature control, power exhaust and air
recirculation. Redesigned and now with whisper quiet operation.
The EconoRed II 30" conveyor dryer is available as a single or double chamber dryer.
*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.
Electric: 240V / 32A / 1 Phase / 3 wire 50/60HZ (3 wire = 2 hot - 1 ground)
*** Wire and plug not included. Terminal block provided for on-site
electrical hookup. Must adhere to local regulations. Consult licensed
electrician. ***
Production: 300+ Plastisol Shirts/Hour* (Add a 2nd chamber for 600+ plastisol shirts/hour*)
Belt Width: 30"
Belt Speed: 1-16 FPM
Overall Dimensions:
(L x W x H) 87" x 46" x 61"
Chamber Length: 36"
Chamber In-Feed Width: 34.5"
Chamber In-Feed Height: 2" - 7" (adjustable)
Heater Dimensions: (2) 12" x 24"
Heater Wattage: 7,200 watts (2 x 3,600)
- "X-Series" Conveyor Belt Tracking System
- Focused Exhaust Air System evacuates fumes and moisture quickly
- Infrared Focusing System: 2" - 7" belt-to-heater clearance
- Heavy duty DC belt speed motor with digital voltage display
- Digital PID Temperature controller is accurate to +/-1°F
- 3 Year Defect Warranty
- 15 Year Heater Warranty
Optional:
- Belt Extensions (18", 36", or 54")
- Wheel set with locking casters for easy mobility
- Hat Support Rail
Call
(800) 621-4173 for more information regarding additional options. Such as additional heating chambers, an exhaust hood, low friction belt aligner
(recommended for longer conveyor belts), and heavy duty belt motor (also recommended for longer conveyor belts).
*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.
Specifications for EC-II-30 with Double Chambers
Electric: 240V / 55A / 1 Phase / 3 wire 50/60HZ (3 wire = 2 hot - 1 ground)
*** Wire and plug not included. Terminal block provided for on-site
electrical hookup. Must adhere to local regulations. Consult licensed
electrician. ***
Production: 600+ plastisol shirts/hour*
Belt Width: 30"
Belt Speed: 1-16 FPM
Overall Dimensions:
(L x W x H) 123" x 49" x 53"
Chamber Length: 72"
Chamber In-Feed Width: 34.5"
Chamber In-Feed Height: 2" - 7" (adjustable)
Heater Dimensions: (4) 12" x 24"
Heater Wattage: 14,400 watts (4 x 3,600)
What is the Infrared Focusing System?
Infrared emitters have an optimal distance at
which they operate most efficiently. If the emitter is too far away
energy is wasted and lost in the distance. If the emitter
is too close the substrate may come in contact with the emitter
surface. Adjusting the heater height is an absolute necessity if the
products that you print vary in height. We want to maintain an
approximate distance of 2 1/2" from heater surface to ink.