Customer Reviews
Price: $5,995.00
Part No: VXLRX254
Availability: Discontinued

CONVEYOR EXTENSION:

*CRATING:

Optional Additions:

The LittleRed X2-54 is an economical dual heater dryer for shops that require a mid/high production output. Capable of 520* pcs/hr/chamber plastisol or 180 discharge/water-based printed garments

Download BrochureDownload the Brochure

*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.

Electric: 240V, 1 Phase, 10,400 Watts, 44 Amps,

*** Wire and plug not included. Terminal block provided for on-site electrical hookup. Must adhere to local regulations. Consult licensed electrician. ***

Production: 520+ Shirts/Hour* (Plastisol)
180+ Shirts/Hour* (Waterbased/Discharge)
Belt Width: 54"
Overall Dimensions:
(L x W x H) 84" x 65" x 48"
Chamber Length: 36"
Chamber In-Feed Width: 33.5"
Chamber In-Feed Height: 2" - 7" (adjustable)
Heater Dimensions: (2) 12" x 48"

  • "X-Series" Conveyor Belt Tracking System with 54" wide PTFE coated belt
  • Infrared Focusing System: 2" - 7" belt-to-heater clearance, adjustable separately on each side for each heater
  • DC belt speed control
  • 3 Year Defect Warranty
  • 15 Year Heater Warranty

Optional:

  • Additional Chamber (2) 2600W / 240V heaters
  • Belt Extensions (18" or 36")
  • Wheel set with locking casters for easy mobility

Call (800) 621-4173 for more information regarding additional options. Such as the exhaust hood, low friction belt aligner (recommended for longer conveyor belts), and heavy duty belt motor (also recommended for longer conveyor belts).

*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.

What is the Infrared Focusing System?

Infrared emitters have an optimal distance at which they operate most efficiently. If the emitter is too far away energy is wasted and lost in the distance. If the emitter is too close the substrate may come in contact with the emitter surface. Adjusting the heater height is an absolute necessity if the products that you print vary in height. We want to maintain an approximate distance of 2 1/2" from heater surface to ink.

Screen Printing Class