The LittleRed X1 Conveyor Dryer is a mid-level, compact, floor standing, dryer with 54" wide belt is
the perfect companion for start-ups, home-based, and traveling printers.
Easily cures up to 260 plastisol-printed pcs/hr.
Download the Brochure
*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.
Electric: 240V, 1 Phase, 5200 Watts, 22 Amps
Production: 260+ Shirts/Hour* (Plastisol)
90+ Shirts/Hour* (Waterbased/Discharge)
Belt Width: 54"
Overall Dimensions: (L x W x H) 66" x 65" x 48"
Chamber Length: 18"
Chamber In-Feed Width: 33.5"
Chamber In-Feed Height: 2" - 7" (adjustable)
Heater Dimensions: 12" x 48"
- "X-Series" Conveyor Belt Tracking System with 30" (76 cm) wide PTFE coated belt
- Infrared Focusing System: 2" - 7" belt-to-heater clearance, adjustable separately on each side for each heater
- DC belt speed control
- 3 Year Defect Warranty
- 15 Year Heater Warranty
*Rated Shirts/hr are approximations and are based on certain conditions including humidity, image size, substrate material, etc.
What is the Infrared Focusing System?
Infrared emitters have an optimal distance at
which they operate most efficiently. If the emitter is too far away
energy is wasted and lost in the distance. If the emitter
is too close the substrate may come in contact with the emitter
surface. Adjusting the heater height is an absolute necessity if the
products that you print vary in height. We want to maintain an
approximate distance of 2 1/2" from heater surface to ink.