Customer Reviews
Price: $23.13
Part No: 14QXOLB9112
Availability: Discontinued

SIZE:


Direct Print Plastisol Ink
XOLB “Xtra Opaque Low Bleed” inks are high opacity multi-purpose inks that are designed to produce extremely opaque prints yet are very easy to print on a manual press. The smooth creamy consistency leaves a uniform print for under-basing and can be opaque on black without a white base with screens as fine as 160 mesh. XOLB inks are fast flashing, cure with a non-tack surface, and contain clean bright pigments.

Substrates:
100% cotton or cotton/polyester blends. Always test print fabric before beginning production

Application Information:
The XOLB series inks can be printed right out of the containers without any modifications.

Mesh:
80 to 305

Squeegee:
60-70 Durometer

Emulsion:
Any direct emulsion or capillary film.

Gel/ Flash Cure:
Flash 2-3 seconds with the ink reaching 150-250F. To gel, ink should not exceed 250F. Always complete a test print before doing a production run.

Full Cure:
325 F (163C)

Transfer:
Transfer at 350F with a transfer adhesive. Cold peel.

Wash Up:
Mineral spirits or any environmentally friendly plastisol screen wash.

Storage:
Recommended storage temperature is 65-90 F (18-32 C). Avoid storing in direct sunlight and moist humid air.

Modifiers:
P-5011 Curable Reducer: Use if thinning is required

Screen Printing Class