The 7100 Performance Pro™ Series consists of low bleed, non-phthalate, low cure* inks that can be printed on performance fabrics and other sports-related garments.
Fabric: 100% Polyester, Poly-blends, and Performance Fabrics
Cure Temperature: 275°F-300°F
Ink Application: 7100 Series should be used straight from the container without any modifications
Additives: Not Recommended
Screen Mesh: 110-230t/in monofilament
Emulsion: Any direct or indirect emulsion or capillary film in the 35 to 70 micron range
Squeegee: 65-75 Durometer, Sharp edge
*Please note that these inks must be cured at the recommended
is 275°F to 300°F)
, which is lower than standard plastisol inks 320°F.