7041 Ultra Low-Bleed Paramount White offers superior bleed
resistance, outstanding print performance, very fast, excellent opacity
and a soft hand. It is ideal for high and low mesh counts and unlike
other competitive inks, 7041 Paramount White contains no bleaching
agents and is non-phthalate.
- Excellent Opacity
- Creamy Viscosity
- Ultra Low Bleed
- Low cure (275°-325°F)
- Non-Phthalate (NP)
- Fast Flash
- Ideal for Low or High Mesh Counts
- No Bleaching Agents
Recommended Fabrics:
Cotton/polyester blends, polyester and 100% cotton. Always test print fabric for possible dye migration before beginning a production run.
Ink Application:
7041 LB NP White should be used from the container without any modifications. If thinning is required, use 1% to 5% by weight 1099 LB Curable Low Bleed Reducer. Using other reducers or additives may lower the bleed resistance and/or opacity of the ink. Adding too much reducer will cause loss of opacity.
Mesh and Emulsion:
60-305 t/in or 24-120 t/cm Monofilament
Use 110-305 t/cm or 43-120 t/cm Monofilament for under basing
Any Direct or indirect solvent resistant emulsion. Use 35 to 70 micron capillary film for best results.
Squeegee:
65-70 Durometer, Sharp Edge
60/90/60 or 70/90/70 Triple Durometer, Sharp Edge
Cure Temperature:
275°F to 325°F (149°C to 160°C) entire ink film
Clean-Up:
Any environmentally friendly plastisol screen wash
Storage:
Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed
Printable Version