Customer Reviews
FlexCure Paramount White
  • FlexCure Paramount White
  • 7041 Paramount White - IC70412
  • 7041 Paramount White - IC70412
Price: $49.05
Part No: IC70412
Availability: Out of Stock


7041 Ultra Low-Bleed Paramount White offers superior bleed resistance, outstanding print performance, very fast, excellent opacity and a soft hand. It is ideal for high and low mesh counts and unlike other competitive inks, 7041 Paramount White contains no bleaching agents and is non-phthalate.

  • Excellent Opacity
  • Creamy Viscosity
  • Ultra Low Bleed
  • Low cure (275°-325°F)
  • Non-Phthalate (NP)
  • Fast Flash
  • Ideal for Low or High Mesh Counts
  • No Bleaching Agents

Recommended Fabrics:
Cotton/polyester blends, polyester and 100% cotton. Always test print fabric for possible dye migration before beginning a production run.

Ink Application:
7041 LB NP White should be used from the container without any modifications. If thinning is required, use 1% to 5% by weight 1099 LB Curable Low Bleed Reducer. Using other reducers or additives may lower the bleed resistance and/or opacity of the ink. Adding too much reducer will cause loss of opacity.

Mesh and Emulsion:
60-305 t/in or 24-120 t/cm Monofilament
Use 110-305 t/cm or 43-120 t/cm Monofilament for under basing

Any Direct or indirect solvent resistant emulsion. Use 35 to 70 micron capillary film for best results.

65-70 Durometer, Sharp Edge
60/90/60 or 70/90/70 Triple Durometer, Sharp Edge

Cure Temperature:
275°F to 325°F (149°C to 160°C) entire ink film

Any environmentally friendly plastisol screen wash

Recommend storage at 65°F to 90°F (18°C to 32°C). Avoid storage in direct sunlight. Keep containers well sealed

Printable Version

iX6820 Film RIP Combo