Customer Reviews
Price: $35.63
Part No: IC6123
Availability: Stock
*Size:



Quantity:

6100 Super Opaque Series Direct Print Plastisol Inks come in 18 colors and contain a high loading of pigments for maximum coverage on dark garments, thus eliminating the
need for under-basing.

The 6100 Series can also be printed on light colored garments at higher mesh countsor reduced to obtain soft-hand, opaque prints.

The 6100 Series is well suited for automated equipment although excellent results can be achieved in almost any printing operation.

  • Cure (325°F)
  • Non-Phthalate
  • Low Tack
  • Can be printed wet-on-wet

Technical Data Sheet (Printable Version)

Recommended Fabrics:
100% cotton and 50/50 cotton/polyester blends. Use an underbase for dark fabrics. To achieve a softer soft and faster production speeds, print underbase through finer mesh counts (160-230 t/in).

Ink Application:
6100 Series colors should be printed without any modifications. If thinning is required, use 1099 Low Bleed Curable Reducer (1% to 3% by weight)

*Adding too much reducer or other additives to the 6100 Series inks may cause curing/fusing or increased dye migration problems

Screen Mesh: 61 to 230 t/in

Emulsion:
Any direct or indirect plastisol emulsion. For capillary film, use 35 to 70 micron for best results.

Squeegee: 60-70 Durometer, Sharp Edge

Cure Temperature:
325°F entire ink film

*It is always recommended to test dryer temperatures and wash test the printed product before and during a production run.

Clean Up: Any eco-friendly plastisol screen wash.

Storage of Ink Containers:
Keep indoors and store in a cool area. Recommended storage at 65º F to 90º F (18º C to 32º C). Avoid storage in direct sunlight or in extreme temperature conditions.

Technical Data Sheet (Printable Version)

Cool White Plastisol Ink on Sale