A. THE “FLASH TABLE UP - FLASH TABLE DOWN SWITCH” ( FIG. 25 ) ON THE FLASHBACK CONTROL PANEL MUST BE IN THE FLASH TABLE DOWN MODE. CHANGING THIS SWITCH TO FLASH TABLE UP WITHOUT FIRST ADJUSTING THE FLASHBACK HEIGHT 2 INCHES, WILL RESULT IN THE TABLE COMING UP UNDER AN EXTENDED ELEMENT.

B. THE SWITCH LOCATED UNDER THE LEFT FRONT CORNER OF THE ALUMINUM COVER IS THE TABLE UP SAFETY SWITCH. (FIG. 26) THIS SWITCH MUST BE ACTIVATED BY THE ELEMENT TRAY COMPLETELY RETRACTING UNDER THE CONTROL BOX. IF YOUR PALLET TABLE CAME UP WITH THE ELEMENT TRAY EXTENDED AND THE SWITCH FROM STEP 1 IS IN THE FLASH TABLE DOWN POSITION. THE TABLE UP SAFETY SWITCH MAY BE HANGING UP OR IT IS DEFECTIVE.